[SOLVED] Netzwerkarte hat falschen Namen

[a1d3s]

Guten Morgen,
Ich habe ein Proxmox am laufen da wird mir eine Netzwerkkarte als rename6 angezeigt anstatt eth9

ls /sys/class/net/
bond0  bond1  bond1.49  bond1.50  bond1.63  bonding_masters  eth0  eth1  eth2  eth3  eth8  lo  rename6  vmbr0  vmbr49  vmbr50  vmbr63

ethtool rename6
Settings for rename6:
        Supported ports: [ TP ]
        Supported link modes:   100baseT/Full
                                1000baseT/Full
                                10000baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  100baseT/Full
                                1000baseT/Full
                                10000baseT/Full

pveversion
pve-manager/4.4-18/ef2610e8 (running kernel: 4.4.83-1-pve)

jemand eine idee wie ich daraus ein eth9 machen kann?

 

[fabian]

ip link set rename6 name eth9

 

[a1d3s]

Danke, ich musste aber die ganze udev neu erstellen lassen und dann die Netzwerke neu hinzufügen.
Ich hatte eine Karte von 1Gb getauscht gegen die 10Gb

root@pve1:~# cat /etc/udev/rules.d/70-persistent-net.rules

# PCI device 0x8086:0x1521 (igb)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:25:90:94:06:17", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth7"

# PCI device 0x14e4:0x1639 (bnx2)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="d4:85:64:ca:b7:7c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3"

# PCI device 0x8086:0x1521 (igb)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:25:90:94:06:15", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth5"

# PCI device 0x14e4:0x1639 (bnx2)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="d4:85:64:ca:b7:7a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

# PCI device 0x8086:0x1521 (igb)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:25:90:94:06:14", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4"

# PCI device 0x14e4:0x1639 (bnx2)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="d4:85:64:ca:b7:78", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

# PCI device 0x14e4:0x1639 (bnx2)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="d4:85:64:ca:b7:76", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x8086:0x1521 (igb)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:25:90:94:06:16", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth6"

# PCI device 0x8086:0x1528 (ixgbe)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="b4:96:91:00:54:60", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth8"

# PCI device 0x8086:0x1528 (ixgbe)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="b4:96:91:00:54:62", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth8"

es gab die eth8 zwei mal und die igb stand dann sinnloser weise noch drin.