[SOLVED] Networkconfig not correct?!

[Gurke258]

Hello,

I installed PVE 8.0 today and entered the IP 192.168.178.210 at the beginning and mene Fritzbox as gateway (192.168.178.1).

However, I do not reach the Fritzbox or the WI on my computer.

But in the FB the 192.168.178.33 is shown as DHCP address (came after the installation).

I still do not see through with all the network interfaces. I have a HP ProLiant G6 DL 380 server with 4 LAN ports in the back. Stuck in the first one.


In my /etc/network/Interfaces file it looks like this now:

auto lo
iface lo inet loopback

auto enp3s0f1
iface enp3s0f1 inet manual

auto vmbr0
iface vmbr0 inet static
    adress 192.168.178.210
    netmask 255.255.255.0
    gateway 192.168.178.1
    bridge-ports enp3s0f1
    bridge stp off
    brifge-fd 0
 
iface enp2s0f0 inet manual

iface enp2s0f1 inet manual

iface enp3s0f0 inet manual

Can someone help me further?


How do I know which interface is which port, if they have such funny names?

 

[Spoonman2002]

From Proxmox host start a # ping 192.168.178.1 and plug the ethernet cable from port 1 through 4 and see which port has connection to the FB.
(ping reply)

 

[Spoonman2002]

oh and it's address, not adress in /etc/network/interfaces.
"adress 192.168.178.210"

 

[Gurke258]

thanks i found the right port... but why these names so and not for example eth0

 

[donhwyo]

Here is some interesting info about ethernet name changes.

https://forum.proxmox.com/threads/proxmox-ve-8-0-released.129320/post-572950

 

[Gurke258]

thanks