Need to run manual repair - but cant

Lewys

New Member
Jul 13, 2020
1
0
1
28
Hey guys,

I added another VD in my dell H710 config, but the first VD that proxmox is on stayed the same.

When I rebooted back into proxmox it was complaining about something, and said that I had to run a manual repair.

I've been battling it for a few hours now but im at a loss.

Ive been trying to run lvconvert --repair pve/data

but it tells me that

Active pools cannot be repaired. Use lvchange -an first.

so I run lvchange -an pve/data

it appears to work? doesnt say otherwise.

But the lvconvert command outputs the same...

I cant get my pool online and I cant access any of my VMs :(


My lvscan shows:

Code:
root@T620:~# vgs
  VG  #PV #LV #SN Attr   VSize  VFree
  pve   2  35   0 wz--n- <4.73t 1.08t
root@T620:~# lvscan
  ACTIVE            '/dev/pve/swap' [740.00 MiB] inherit
  ACTIVE            '/dev/pve/root' [96.00 GiB] inherit
  inactive          '/dev/pve/data' [<3.49 TiB] inherit
  inactive          '/dev/pve/vm-100-disk-0' [256.00 GiB] inherit
  inactive          '/dev/pve/vm-160-disk-0' [256.00 GiB] inherit
  inactive          '/dev/pve/vm-103-disk-0' [48.00 GiB] inherit
  inactive          '/dev/pve/vm-107-disk-0' [64.00 GiB] inherit
  inactive          '/dev/pve/vm-103-state-Installed' [<4.49 GiB] inherit
  inactive          '/dev/pve/snap_vm-103-disk-0_Installed' [48.00 GiB] inherit
  inactive          '/dev/pve/base-109-disk-0' [100.00 GiB] inherit
  inactive          '/dev/pve/vm-110-disk-0' [32.00 GiB] inherit
  inactive          '/dev/pve/vm-114-disk-0' [128.00 GiB] inherit
  inactive          '/dev/pve/vm-115-disk-0' [32.00 GiB] inherit
  inactive          '/dev/pve/vm-122-disk-0' [32.00 GiB] inherit
  inactive          '/dev/pve/vm-123-disk-0' [32.00 GiB] inherit
  inactive          '/dev/pve/vm-125-disk-0' [32.00 GiB] inherit
  inactive          '/dev/pve/vm-124-disk-0' [128.00 GiB] inherit
  inactive          '/dev/pve/vm-126-disk-0' [16.00 GiB] inherit
  inactive          '/dev/pve/vm-150-disk-0' [16.00 GiB] inherit
  inactive          '/dev/pve/vm-150-disk-1' [250.00 GiB] inherit
  inactive          '/dev/pve/vm-150-disk-2' [32.00 GiB] inherit
  inactive          '/dev/pve/vm-150-disk-3' [320.00 GiB] inherit
  inactive          '/dev/pve/vm-101-disk-0' [128.00 GiB] inherit
  inactive          '/dev/pve/vm-130-disk-0' [32.00 GiB] inherit
  inactive          '/dev/pve/vm-127-disk-0' [32.00 GiB] inherit
  inactive          '/dev/pve/vm-102-disk-0' [256.00 GiB] inherit
  inactive          '/dev/pve/vm-131-disk-0' [16.00 GiB] inherit
  inactive          '/dev/pve/vm-116-disk-0' [32.00 GiB] inherit
  inactive          '/dev/pve/vm-120-disk-0' [48.00 GiB] inherit
  inactive          '/dev/pve/vm-212-disk-0' [256.00 GiB] inherit
  inactive          '/dev/pve/vm-112-disk-0' [20.00 GiB] inherit
  inactive          '/dev/pve/vm-113-disk-0' [32.00 GiB] inherit
  ACTIVE            '/dev/pve/data_meta0' [15.81 GiB] inherit
  ACTIVE            '/dev/pve/data_meta1' [15.81 GiB] inherit

I would love if anybody has some input as I dont know how to proceed!
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!