Need help configuring nic's in pfSense

  • Thread starter Thread starter nordviks
  • Start date Start date
N

nordviks

Guest
Need help configuring nic's in pfSense

I have made a new vmbr(1) and configured it as the LAN device and vmbr0 as WAN. I have it installed but cant ping the Internet. Vmbr0 is set to DHCP but I have also tried to set it manually to the Proxmox IP.

I have 32 IP's that we got from the hosting company, I'm using one of these on the LAN interface(static). Vmbr1 is set up as with rtl8139 and nothing in Ports/Slaves.

What am I missing? I read in a thread that after doing the above, everything just worked.
 
Is the correct configuration of pfSense, when I have only 1 Ethernet card?

This: vmbr0 --> WAN pfSense = Main server IP config --> LAN pfSense = 192.168.0.1 --> vmbr1 --> Proxmox IP = 192.168.0.2

What is the correct configuration of vmbr0, vmbr1 and eth0? My current config is the default Proxmox config for vmbr0 and eth0 (Uses the IP info from the hosting company, I reach Proxmox through the Internet). I configured vmbr1 with 192.168.0.1 as IP and 255.255.255.0 as mask, vmbr1 is not attached to any device.

Any help is greatly appreciated.
 
You must log in or register to reply here.
Top Bottom