Hello everyone, I'm confused by these messages, can this be fixed?
Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Mar 14 13:10:25 pve-backup smartd[860]: Device: /dev/sda, opened
Mar 14 13:10:25 pve-backup smartd[860]: Device: /dev/sda, [LSI Logical Volume 3000], lu id: 0x600508e0000000001d43bf6941948102, 998 GB
Mar 14 13:10:25 pve-backup smartd[860]: Device: /dev/sda, Bad IEC (SMART) mode page, err=4, skip device
Mar 14 13:10:25 pve-backup smartd[860]: Device: /dev/sdb, type changed from 'scsi' to 'sat'
Mar 14 13:10:25 pve-backup smartd[860]: Device: /dev/sdb [SAT], opened
Mar 14 13:10:25 pve-backup kernel: mpt2sas_cm0 fault info from func: _base_make_ioc_ready
Mar 14 13:10:25 pve-backup kernel: mpt2sas_cm0: fault_state(0x265d)!
Mar 14 13:10:25 pve-backup kernel: mpt2sas_cm0: sending diag reset !!
Mar 14 13:10:26 pve-backup kernel: mpt2sas_cm0: diag reset: SUCCESS
Also after that the message appears:
mpt3sas_wait_for_ioc:failed due to ioc not operational
Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Mar 14 13:10:25 pve-backup smartd[860]: Device: /dev/sda, opened
Mar 14 13:10:25 pve-backup smartd[860]: Device: /dev/sda, [LSI Logical Volume 3000], lu id: 0x600508e0000000001d43bf6941948102, 998 GB
Mar 14 13:10:25 pve-backup smartd[860]: Device: /dev/sda, Bad IEC (SMART) mode page, err=4, skip device
Mar 14 13:10:25 pve-backup smartd[860]: Device: /dev/sdb, type changed from 'scsi' to 'sat'
Mar 14 13:10:25 pve-backup smartd[860]: Device: /dev/sdb [SAT], opened
Mar 14 13:10:25 pve-backup kernel: mpt2sas_cm0 fault info from func: _base_make_ioc_ready
Mar 14 13:10:25 pve-backup kernel: mpt2sas_cm0: fault_state(0x265d)!
Mar 14 13:10:25 pve-backup kernel: mpt2sas_cm0: sending diag reset !!
Mar 14 13:10:26 pve-backup kernel: mpt2sas_cm0: diag reset: SUCCESS
Also after that the message appears:
mpt3sas_wait_for_ioc:failed due to ioc not operational