Hi
We have 7 machine cluster with vSAN with the following configuration.
HP ProLiant DL380 G10 24-Bay Server with 2.5'' Bays
- 2x 3.10Ghz Gold 6254 18-Core Processors - Total of 36x Cores
- 24x 32GB PC4-2933Y RAM - Total of 768GB Memory
- 3x 1.92TB SSD SAS 2.5'' 12G + 21x 2.4TB 10K SAS 2.5'' 12G
- 2x 800W Platinum Power Supplies with 2x Power Cords
- P408i-a RAID Controller 2GB Cache
- No Optical Drive
- Network Interface: 1x Dual-Port 10GB SFP+ (HP_548SFP+)
Now have to migrate these to Proxmox. Will get a POC of similar configuration with 3 nodes, setup and configure CEPH. Now after going through the forums, I see that P408i is not good with CEPH. Can you suggest good HBA which would help me connect the 24 drives? Will HPE H240 support my requirements
Also planning to add HP NS204i-p OS Boot Device with 2x 480GB M.2 NVMe SSDs for Proxmox install which would eventually let me use the hard drives completely for Ceph
The above configuration is for vSAN with 3 disk groups, each having a cache SSD and remaining as capacity drives. How do I structure the same for Ceph or does it require any modification?
We have 7 machine cluster with vSAN with the following configuration.
HP ProLiant DL380 G10 24-Bay Server with 2.5'' Bays
- 2x 3.10Ghz Gold 6254 18-Core Processors - Total of 36x Cores
- 24x 32GB PC4-2933Y RAM - Total of 768GB Memory
- 3x 1.92TB SSD SAS 2.5'' 12G + 21x 2.4TB 10K SAS 2.5'' 12G
- 2x 800W Platinum Power Supplies with 2x Power Cords
- P408i-a RAID Controller 2GB Cache
- No Optical Drive
- Network Interface: 1x Dual-Port 10GB SFP+ (HP_548SFP+)
Now have to migrate these to Proxmox. Will get a POC of similar configuration with 3 nodes, setup and configure CEPH. Now after going through the forums, I see that P408i is not good with CEPH. Can you suggest good HBA which would help me connect the 24 drives? Will HPE H240 support my requirements
Also planning to add HP NS204i-p OS Boot Device with 2x 480GB M.2 NVMe SSDs for Proxmox install which would eventually let me use the hard drives completely for Ceph
The above configuration is for vSAN with 3 disk groups, each having a cache SSD and remaining as capacity drives. How do I structure the same for Ceph or does it require any modification?