I am quite surprised by this issue. I am trying to mount a connected USB drive, but the system simply can't recognize them.
Here goes my lsusb output (I removed the content that is not required)
Point of interest from the above output
Bus 002 Device 007: ID 0bc2:ab24 Seagate RSS LLC Backup Plus Portable Drive
Bus 002 Device 006: ID 21c4:00e5 Lexar SL600
Though both the drives are shown in the lsusb they don't appear in either lslbk or fdsik -l
I tried dmesg -w to remove and plugin USB and there were no errors
Here goes my lsusb output (I removed the content that is not required)
Code:
$lsusb
Bus 004 Device 002: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 007: ID 0bc2:ab24 Seagate RSS LLC Backup Plus Portable Drive
Bus 002 Device 006: ID 21c4:00e5 Lexar SL600
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 04f2:b6c0 Chicony Electronics Co., Ltd HP HD Camera
Bus 001 Device 003: ID 8087:0026 Intel Corp. AX201 Bluetooth
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubPoint of interest from the above output
Bus 002 Device 007: ID 0bc2:ab24 Seagate RSS LLC Backup Plus Portable Drive
Bus 002 Device 006: ID 21c4:00e5 Lexar SL600
Though both the drives are shown in the lsusb they don't appear in either lslbk or fdsik -l
Code:
#lslbk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
nvme0n1 259:0 0 476.9G 0 disk
├─nvme0n1p1 259:1 0 1007K 0 part
├─nvme0n1p2 259:2 0 1G 0 part /boot/efi
└─nvme0n1p3 259:3 0 475.9G 0 part
├─pve-swap 252:0 0 12G 0 lvm [SWAP]
├─pve-root 252:1 0 75G 0 lvm /
├─pve-data_tmeta 252:2 0 3.7G 0 lvm
│ └─pve-data-tpool 252:4 0 365.5G 0 lvm
│ ├─pve-data 252:5 0 365.5G 1 lvm
│ ├─pve-vm--9000--cloudinit 252:6 0 4M 0 lvm
│ ├─pve-vm--109--cloudinit 252:7 0 4M 0 lvm
│ ├─pve-vm--109--disk--0 252:8 0 47.2G 0 lvm
│ ├─pve-vm--100--disk--0 252:9 0 10G 0 lvm
│ ├─pve-vm--101--disk--0 252:10 0 2G 0 lvm
│ ├─pve-vm--102--disk--0 252:11 0 8G 0 lvm
│ └─pve-vm--103--disk--0 252:12 0 4G 0 lvm
└─pve-data_tdata 252:3 0 365.5G 0 lvm
└─pve-data-tpool 252:4 0 365.5G 0 lvm
├─pve-data 252:5 0 365.5G 1 lvm
├─pve-vm--9000--cloudinit 252:6 0 4M 0 lvm
├─pve-vm--109--cloudinit 252:7 0 4M 0 lvm
├─pve-vm--109--disk--0 252:8 0 47.2G 0 lvm
├─pve-vm--100--disk--0 252:9 0 10G 0 lvm
├─pve-vm--101--disk--0 252:10 0 2G 0 lvm
├─pve-vm--102--disk--0 252:11 0 8G 0 lvm
└─pve-vm--103--disk--0 252:12 0 4G 0 lvmI tried dmesg -w to remove and plugin USB and there were no errors
Last edited:
