i have two pool storage, raid-05 and raid 0
i can only see the raid-0 storage on webGui.
root@Risk-Storage-Energyaksa:~# fdisk -l
Disk /dev/sda: 18.19 TiB, 20000588955648 bytes, 39063650304 sectors
Disk model: PERC H700
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
i can only see the raid-0 storage on webGui.
root@Risk-Storage-Energyaksa:~# fdisk /dev/sda -w auto
Welcome to fdisk (util-linux 2.36.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table.
The size of this disk is 18.2 TiB (20000588955648 bytes). DOS partition table format cannot be used on drives for volumes larger than 2199023255040 bytes for 512-byte sectors. Use GUID partition table format (GPT).
Created a new DOS disklabel with disk identifier 0x2e712742.
Command (m for help):
Command (m for help):
root@Risk-Storage-Energyaksa:~# fdisk -l
Disk /dev/sda: 18.19 TiB, 20000588955648 bytes, 39063650304 sectors
Disk model: PERC H700
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
