Hello all,
I recently bought a 400GB Micron 7450 Max NVMe drive to replace a Seagate FireCuda 530 in my HP Elite Mini 800 G9 with an Intel Core i9-12900T and 64GB DDR5 RAM.
After replacing the drive, it seems like I can't install Proxmox, I just get a black screen and the 'HDD' light is solid white like if the drive was being used (no flashing). No Proxmox screen with the option to select GUI or CLI.
The BIOS settings are the same as how I had Proxmox installed on the FireCude 530.
I tested to make sure the drive worked by installing Windows and it installed normally.
What can be causing this?
I replaced the drive because the FireCuda was being chewed up (wear level was high for a 6-7 month old drive)
Thanks for the help!
I recently bought a 400GB Micron 7450 Max NVMe drive to replace a Seagate FireCuda 530 in my HP Elite Mini 800 G9 with an Intel Core i9-12900T and 64GB DDR5 RAM.
After replacing the drive, it seems like I can't install Proxmox, I just get a black screen and the 'HDD' light is solid white like if the drive was being used (no flashing). No Proxmox screen with the option to select GUI or CLI.
The BIOS settings are the same as how I had Proxmox installed on the FireCude 530.
I tested to make sure the drive worked by installing Windows and it installed normally.
What can be causing this?
I replaced the drive because the FireCuda was being chewed up (wear level was high for a 6-7 month old drive)Thanks for the help!
Last edited: