Code:
lxc-start -n 103 -F
To make things more complicated this only happens on one of my PVE nodes. When started on the other it breezes right past starting the network.
On container:
Code:
$cat /etc/network/interfaces
source-directory /etc/network/interfaces.d
auto eth0
iface eth0 inet dhcp
iface eth0 inet6 dhcp
On Host that hangs:
Code:
$pveversion -v
proxmox-ve: 4.2-60 (running kernel: 4.4.15-1-pve)
pve-manager: 4.2-17 (running version: 4.2-17/e1400248)
pve-kernel-4.4.6-1-pve: 4.4.6-48
pve-kernel-4.4.15-1-pve: 4.4.15-60
lvm2: 2.02.116-pve2
corosync-pve: 2.4.0-1
libqb0: 1.0-1
pve-cluster: 4.0-43
qemu-server: 4.0-85
pve-firmware: 1.1-8
libpve-common-perl: 4.0-71
libpve-access-control: 4.0-19
libpve-storage-perl: 4.0-56
pve-libspice-server1: 0.12.8-1
vncterm: 1.2-1
pve-qemu-kvm: 2.6-1
pve-container: 1.0-72
pve-firewall: 2.0-29
pve-ha-manager: 1.0-33
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u2
lxc-pve: 2.0.3-4
lxcfs: 2.0.2-pve1
cgmanager: 0.39-pve1
criu: 1.6.0-1
zfsutils: 0.6.5.7-pve10~bpo80
$cat /etc/network/interfaces
auto lo
iface lo inet loopback
iface eth0 inet manual
iface eth1 inet manual
iface eth2 inet manual
iface eth3 inet manual
auto vmbr0
iface vmbr0 inet static
address 192.168.2.154
netmask 255.255.255.0
gateway 192.168.2.1
bridge_ports eth0
bridge_stp off
bridge_fd 0
On host that does NOT hang:
Code:
$pveversion -v
proxmox-ve: 4.2-60 (running kernel: 4.4.15-1-pve)
pve-manager: 4.2-17 (running version: 4.2-17/e1400248)
pve-kernel-4.4.6-1-pve: 4.4.6-48
pve-kernel-4.4.13-2-pve: 4.4.13-58
pve-kernel-4.4.15-1-pve: 4.4.15-60
lvm2: 2.02.116-pve2
corosync-pve: 2.4.0-1
libqb0: 1.0-1
pve-cluster: 4.0-43
qemu-server: 4.0-85
pve-firmware: 1.1-8
libpve-common-perl: 4.0-71
libpve-access-control: 4.0-19
libpve-storage-perl: 4.0-56
pve-libspice-server1: 0.12.8-1
vncterm: 1.2-1
pve-qemu-kvm: 2.6-1
pve-container: 1.0-72
pve-firewall: 2.0-29
pve-ha-manager: 1.0-33
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u2
lxc-pve: 2.0.3-4
lxcfs: 2.0.2-pve1
cgmanager: 0.39-pve1
criu: 1.6.0-1
zfsutils: 0.6.5.7-pve10~bpo80
$cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto vmbr0
iface vmbr0 inet static
address 192.168.2.150
netmask 255.255.255.0
gateway 192.168.2.1
bridge_ports eth0
bridge_stp off
bridge_fd 0
logfile from lxc-start attached.