I've checked the target HDD and the disk (image) does exist.
WARNING: You have not turned on protection against thin pools running out of space.
WARNING: Set activation/thin_pool_autoextend_threshold below 100 to trigger automatic extension of thin pools before they get full.
Logical volume "vm-135-disk-0" created.
WARNING: Sum of all thin volume sizes (<197.49 GiB) exceeds the size of thin pool pve/data and the amount of free space in volume group (<16.00 GiB).
mke2fs 1.44.5 (15-Dec-2018)
Discarding device blocks: 4096/2097152 528384/2097152 done
Creating filesystem with 2097152 4k blocks and 524288 inodes
Filesystem UUID: 9d2a60d5-a23e-40df-bdd4-1f63a17180c8
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Allocating group tables: 0/64 done
Writing inode tables: 0/64 done
Creating journal (16384 blocks): done
Multiple mount protection is enabled with update interval 5 seconds.
Writing superblocks and filesystem accounting information: 0/64 done
Number of files: 27,977 (reg: 21,760, dir: 2,906, link: 3,279, special: 32)
Number of created files: 27,975 (reg: 21,760, dir: 2,904, link: 3,279, special: 32)
Number of deleted files: 0
Number of regular files transferred: 21,740
Total file size: 1,991,012,666 bytes
Total transferred file size: 1,748,344,654 bytes
Literal data: 1,748,344,654 bytes
Matched data: 0 bytes
File list size: 786,401
File list generation time: 0.001 seconds
File list transfer time: 0.000 seconds
Total bytes sent: 1,750,459,565
Total bytes received: 440,474
sent 1,750,459,565 bytes received 440,474 bytes 5,379,109.18 bytes/sec
total size is 1,991,012,666 speedup is 1.14
It's been like this all day.
I'm half tempted to copy the target disk, stop this job, manually modify the lxc config to specify my copied target disk as the drive to use?
WARNING: You have not turned on protection against thin pools running out of space.
WARNING: Set activation/thin_pool_autoextend_threshold below 100 to trigger automatic extension of thin pools before they get full.
Logical volume "vm-135-disk-0" created.
WARNING: Sum of all thin volume sizes (<197.49 GiB) exceeds the size of thin pool pve/data and the amount of free space in volume group (<16.00 GiB).
mke2fs 1.44.5 (15-Dec-2018)
Discarding device blocks: 4096/2097152 528384/2097152 done
Creating filesystem with 2097152 4k blocks and 524288 inodes
Filesystem UUID: 9d2a60d5-a23e-40df-bdd4-1f63a17180c8
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Allocating group tables: 0/64 done
Writing inode tables: 0/64 done
Creating journal (16384 blocks): done
Multiple mount protection is enabled with update interval 5 seconds.
Writing superblocks and filesystem accounting information: 0/64 done
Number of files: 27,977 (reg: 21,760, dir: 2,906, link: 3,279, special: 32)
Number of created files: 27,975 (reg: 21,760, dir: 2,904, link: 3,279, special: 32)
Number of deleted files: 0
Number of regular files transferred: 21,740
Total file size: 1,991,012,666 bytes
Total transferred file size: 1,748,344,654 bytes
Literal data: 1,748,344,654 bytes
Matched data: 0 bytes
File list size: 786,401
File list generation time: 0.001 seconds
File list transfer time: 0.000 seconds
Total bytes sent: 1,750,459,565
Total bytes received: 440,474
sent 1,750,459,565 bytes received 440,474 bytes 5,379,109.18 bytes/sec
total size is 1,991,012,666 speedup is 1.14
It's been like this all day.
I'm half tempted to copy the target disk, stop this job, manually modify the lxc config to specify my copied target disk as the drive to use?
