I upgraded from v4 to v5.3-5 this morning. At first proxmox would not come up. I edited /etc/lvm/lvm.conf, setting allow_changes_with_duplicate_pvs = 1. This allowed proxmox to boot. However some of my VMs won't come up. I tried installing multipath-tools and rebooting, but that solved nothing.
Below is the output for pvscan & vgscan. Any recommendations would be helpful.
Below is the output for pvscan & vgscan. Any recommendations would be helpful.
Code:
root@pve1:/dev/mapper# pvscan
WARNING: PV lMZGYT-ndcE-BsgC-ippq-vlzg-W02s-FFDxrn on /dev/mapper/INTEL_SSDSC2BB240G6_PHWA550000YZ240AGN was already found on /dev/mapper/INTEL_SSDSC2BB240G6_PHWA550000PA240AGN.
WARNING: PV lMZGYT-ndcE-BsgC-ippq-vlzg-W02s-FFDxrn prefers device /dev/mapper/INTEL_SSDSC2BB240G6_PHWA550000PA240AGN because device is used by LV.
PV /dev/nvme0n1p3 VG pve lvm2 [238.35 GiB / 15.84 GiB free]
PV /dev/mapper/INTEL_SSDSC2BB240G6_PHWA550000PA240AGN VG software-raid1 lvm2 [212.39 GiB / 112.39 GiB free]
Total: 2 [450.74 GiB] / in use: 2 [450.74 GiB] / in no VG: 0 [0 ]
Code:
root@pve1:/dev/mapper# vgscan
Reading all physical volumes. This may take a while...
WARNING: PV lMZGYT-ndcE-BsgC-ippq-vlzg-W02s-FFDxrn on /dev/mapper/INTEL_SSDSC2BB240G6_PHWA550000YZ240AGN was already found on /dev/mapper/INTEL_SSDSC2BB240G6_PHWA550000PA240AGN.
WARNING: PV lMZGYT-ndcE-BsgC-ippq-vlzg-W02s-FFDxrn prefers device /dev/mapper/INTEL_SSDSC2BB240G6_PHWA550000PA240AGN because device is used by LV.
Found volume group "pve" using metadata type lvm2
Found volume group "software-raid1" using metadata type lvm2
Last edited: