Looking to add disks to proxmox, but not recognized, looks like possible partitions on disks?

[zack3334]

I'm trying to add disks to proxmox and it looks like these partitions are already on the disk, They were a part of a previous proxmox set up, just looking to clear them out
I've tried fdisk, dd, lvremove, vgremove, wipefs nothing seems to work, and could anyone give me some more info on what ├─d1-vm--106--disk--0 253:18 means? is it a partition? why aren't the methods i've used working ? Thanks everyone!



NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 1.8T 0 disk
├─d1-vm--106--disk--0 253:18 0 100G 0 lvm
├─d1-vm--106--disk--1 253:19 0 100G 0 lvm
├─d1-vm--106--disk--2 253:20 0 100G 0 lvm
├─d1-vm--102--disk--0 253:21 0 120G 0 lvm
├─d1-vm--102--disk--1 253:22 0 120G 0 lvm
├─d1-vm--102--disk--2 253:23 0 120G 0 lvm
├─d1-vm--102--disk--3 253:24 0 120G 0 lvm
├─d1-vm--103--disk--0 253:25 0 100G 0 lvm
├─d1-vm--104--disk--0 253:26 0 100G 0 lvm
├─d1-vm--104--disk--1 253:27 0 120G 0 lvm
└─d1-vm--101--disk--0 253:28 0 108G 0 lvm
sdb 8:16 0 931.5G 0 disk
├─d2-vm--106--disk--0 253:11 0 100G 0 lvm
├─d2-vm--106--disk--1 253:12 0 100G 0 lvm
├─d2-vm--106--disk--2 253:13 0 100G 0 lvm
├─d2-vm--106--disk--3 253:14 0 100G 0 lvm
├─d2-vm--106--disk--4 253:15 0 100G 0 lvm
├─d2-vm--106--disk--5 253:16 0 100G 0 lvm
└─d2-vm--106--disk--6 253:17 0 100G 0 lvm
sdc 8:32 0 931.5G 0 disk
├─d3-vm--103--disk--0 253:6 0 120G 0 lvm
├─d3-vm--103--disk--1 253:7 0 120G 0 lvm
├─d3-vm--103--disk--2 253:8 0 120G 0 lvm
├─d3-vm--104--disk--0 253:9 0 120G 0 lvm
└─d3-vm--104--disk--1 253:10 0 120G 0 lvm
sdd 8:48 0 931.5G 0 disk
└─d4-vm--107--disk--0 253:5 0 250G 0 lvm
sde 8:64 0 9.1T 0 disk
sdf 8:80 0 931.5G 0 disk
sdg 8:96 0 9.1T 0 disk
sdh 8:112 0 931.5G 0 disk
sdi 8:128 0 119.2G 0 disk
├─sdi1 8:129 0 1007K 0 part
├─sdi2 8:130 0 512M 0 part
└─sdi3 8:131 0 118.8G 0 part
├─pve-swap 253:0 0 8G 0 lvm [SWAP]
├─pve-root 253:1 0 29.5G 0 lvm /
├─pve-data_tmeta 253:2 0 1G 0 lvm
│ └─pve-data 253:4 0 64.5G 0 lvm
└─pve-data_tdata 253:3 0 64.5G 0 lvm
└─pve-data 253:4 0 64.5G 0 lvm
sdj 8:144 0 119.2G 0 disk

 

[H4R0]

"wipefs -a /dev/sdx" always does the job

 

[zack3334]

"wipefs -a /dev/sdx" always does the job

Now that's what I tried , but it's still holding onto it ! I'm sure it's something I'm overlooking I even tried forcing the wipefs that says successful but still shows

 

[H4R0]

Are you sure you tried with "-a" ?

Does "wipefs /dev/sdx" still print signatures ?