Hi, I am having an issue with my proxmox installation. My version is PVE 8.2.2.
I cloned my disk with Proxmox installation which is a 250GB SSD to a 1TB SSD using Clonezilla. When I tried booting Proxmox on the 1TB, the local-lvm volume is at 0%. The VM and CT cannot find their respective disks as well. However I can still see the disks under "VM Disks" and "CT Volumes".
I can't figure out what is going on and I need help so Proxmox can find the disk while booting.
Below is my pvs, vgs, lvs and lsblk output.
I can see CT volumes
LVM
LVM thin is 1% when it is closer to 90%+
VM can't find the boot disk
Please send help.
I cloned my disk with Proxmox installation which is a 250GB SSD to a 1TB SSD using Clonezilla. When I tried booting Proxmox on the 1TB, the local-lvm volume is at 0%. The VM and CT cannot find their respective disks as well. However I can still see the disks under "VM Disks" and "CT Volumes".
I can't figure out what is going on and I need help so Proxmox can find the disk while booting.
Below is my pvs, vgs, lvs and lsblk output.
Code:
root@pve:~# pvs
PV VG Fmt Attr PSize PFree
/dev/sda3 pve lvm2 a-- <222.57g 16.00g
Code:
root@pve:~# vgs
VG #PV #LV #SN Attr VSize VFree
pve 1 9 0 wz--n- <222.57g 16.00g
Code:
root@pve:~# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
data pve twi-aotz-- <130.27g 0.00 1.22
root pve -wi-ao---- 65.64g
swap pve -wi-ao---- 8.00g
vm-100-disk-0 pve Vwi-a-tz-- 64.00g data 0.00
vm-101-disk-0 pve Vwi-a-tz-- 16.00g data 0.00
vm-102-disk-0 pve Vwi-a-tz-- 6.00g data 0.00
vm-103-disk-1 pve Vwi-a-tz-- 32.00g data 0.00
vm-104-disk-0 pve Vwi-a-tz-- 32.00g data 0.00
vm-105-disk-0 pve Vwi-a-tz-- 4.00g data 0.00
Code:
root@pve:~# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 223.6G 0 disk
├─sda1 8:1 0 1007K 0 part
├─sda2 8:2 0 1G 0 part /boot/efi
└─sda3 8:3 0 222.6G 0 part
├─pve-swap 252:0 0 8G 0 lvm [SWAP]
├─pve-root 252:1 0 65.6G 0 lvm /
├─pve-data_tmeta 252:2 0 1.3G 0 lvm
│ └─pve-data-tpool 252:4 0 130.3G 0 lvm
│ ├─pve-data 252:5 0 130.3G 1 lvm
│ ├─pve-vm--100--disk--0 252:6 0 64G 0 lvm
│ ├─pve-vm--101--disk--0 252:7 0 16G 0 lvm
│ ├─pve-vm--102--disk--0 252:8 0 6G 0 lvm
│ ├─pve-vm--103--disk--1 252:9 0 32G 0 lvm
│ ├─pve-vm--104--disk--0 252:10 0 32G 0 lvm
│ └─pve-vm--105--disk--0 252:11 0 4G 0 lvm
└─pve-data_tdata 252:3 0 130.3G 0 lvm
└─pve-data-tpool 252:4 0 130.3G 0 lvm
├─pve-data 252:5 0 130.3G 1 lvm
├─pve-vm--100--disk--0 252:6 0 64G 0 lvm
├─pve-vm--101--disk--0 252:7 0 16G 0 lvm
├─pve-vm--102--disk--0 252:8 0 6G 0 lvm
├─pve-vm--103--disk--1 252:9 0 32G 0 lvm
├─pve-vm--104--disk--0 252:10 0 32G 0 lvm
└─pve-vm--105--disk--0 252:11 0 4G 0 lvm
sdb 8:16 0 3.6T 0 disk
└─sdb1 8:17 0 3.6T 0 part
sdc 8:32 0 3.6T 0 disk
└─sdc1 8:33 0 3.6T 0 part
sdd 8:48 0 3.6T 0 disk
├─sdd1 8:49 0 2G 0 part
└─sdd2 8:50 0 3.6T 0 part
sde 8:64 0 3.6T 0 disk
└─sde1 8:65 0 3.6T 0 part
sdf 8:80 0 3.6T 0 disk
└─sdf1 8:81 0 3.6T 0 partI can see CT volumes
LVM
LVM thin is 1% when it is closer to 90%+
VM can't find the boot disk
Please send help.
Last edited: