Latest updates and crashes e1000

frankz · May 21, 2022

Hi everyone, I realized that after the latest updates, some knots with the e1000 accuse this error.
I think it's caused by the new kernel upgrade because the same error occurred on two nodes.

Code:

e1000e 0000:00:19.0 enp0s25: Detected Hardware Unit Hang:
                 TDH                  <a9>
                 TDT                  <fe>
                 next_to_use          <fe>
                 next_to_clean        <a8>
               buffer_info[next_to_clean]:
                 time_stamp           <100fe0fe8>
                 next_to_watch        <a9>
                 jiffies              <100fe12d0>
                 next_to_watch.status <0>
               MAC Status             <80083>
               PHY Status             <796d>
               PHY 1000BASE-T Status  <3800>
               PHY Extended Status    <3000>
               PCI Status             <10>
[66906.272996] e1000e 0000:00:19.0 enp0s25: Detected Hardware Unit Hang:
                 TDH                  <a9>
                 TDT                  <fe>
                 next_to_use          <fe>
                 next_to_clean        <a8>
               buffer_info[next_to_clean]:
                 time_stamp           <100fe0fe8>
                 next_to_watch        <a9>
                 jiffies              <100fe14c0>
                 next_to_watch.status <0>
               MAC Status             <80083>
               PHY Status             <796d>
               PHY 1000BASE-T Status  <3800>
               PHY Extended Status    <3000>
               PCI Status             <10>
[66908.293025] e1000e 0000:00:19.0 enp0s25: Detected Hardware Unit Hang:
                 TDH                  <a9>
                 TDT                  <fe>
                 next_to_use          <fe>
                 next_to_clean        <a8>
               buffer_info[next_to_clean]:
                 time_stamp           <100fe0fe8>
                 next_to_watch        <a9>
                 jiffies              <100fe16b9>
                 next_to_watch.status <0>
               MAC Status             <80083>
               PHY Status             <796d>
               PHY 1000BASE-T Status  <3800>
               PHY Extended Status    <3000>
               PCI Status             <10>
[66910.272932] e1000e 0000:00:19.0 enp0s25: Detected Hardware Unit Hang:
                 TDH                  <a9>
                 TDT                  <fe>
                 next_to_use          <fe>
                 next_to_clean        <a8>
               buffer_info[next_to_clean]:
                 time_stamp           <100fe0fe8>
                 next_to_watch        <a9>
                 jiffies              <100fe18a8>
                 next_to_watch.status <0>
               MAC Status             <80083>
               PHY Status             <796d>
               PHY 1000BASE-T Status  <3800>
               PHY Extended Status    <3000>
               PCI Status             <10>
[66911.392684] ------------[ cut here ]------------
[66911.392687] NETDEV WATCHDOG: enp0s25 (e1000e): transmit queue 0 timed out
[66911.392710] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x273/0x280
[66911.392716] Modules linked in: nf_tables binfmt_misc veth nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache netfs ebtable_filter ebtables ip_set ip6table_raw iptable_raw ip6table_filter ip6_tables sctp ip6_udp_tunnel udp_tunnel iptable_filter bpfilter softdog nfnetlink_log nfnetlink intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal snd_hda_codec_hdmi intel_powerclamp coretemp rtl8xxxu kvm_intel snd_hda_codec_realtek snd_hda_codec_generic kvm ledtrig_audio irqbypass snd_hda_intel i915 snd_intel_dspcfg rtl8192cu crct10dif_pclmul ghash_clmulni_intel snd_intel_sdw_acpi snd_hda_codec rtl_usb ttm rtl8192c_common aesni_intel mt7601u snd_hda_core drm_kms_helper rtlwifi mei_hdcp snd_hwdep ppdev crypto_simd cryptd cec snd_pcm rc_core mac80211 i2c_algo_bit snd_timer fb_sys_fops rapl snd syscopyarea cfg80211 intel_cstate sysfillrect efi_pstore pcspkr sysimgblt libarc4 intel_pch_thermal soundcore at24 fujitsu_laptop mei_me parport_pc mei parport sparse_keymap mac_hid
[66911.392778]  tpm_infineon zfs(PO) zunicode(PO) zzstd(O) zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) spl(O) vhost_net vhost vhost_iotlb tap ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi drm sunrpc ip_tables x_tables autofs4 btrfs blake2b_generic xor zstd_compress raid6_pq simplefb dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio libcrc32c crc32_pclmul r8169 i2c_i801 realtek ahci i2c_smbus libahci lpc_ich xhci_pci xhci_pci_renesas e1000e ehci_pci xhci_hcd ehci_hcd tg3 video
[66911.392805] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P           O      5.15.35-1-pve #1
[66911.392807] Hardware name: FUJITSU ESPRIMO P720/D3221-A1, BIOS V4.6.5.4 R1.34.0 for D3221-A1x 01/08/2015
[66911.392808] RIP: 0010:dev_watchdog+0x273/0x280
[66911.392810] Code: eb 97 48 8b 5d d0 c6 05 f0 03 52 01 01 48 89 df e8 d2 7f f9 ff 44 89 e1 48 89 de 48 c7 c7 38 5f 0a 92 48 89 c2 e8 7f ff 1b 00 <0f> 0b eb 80 e9 2f 1d 25 00 0f 1f 40 00 0f 1f 44 00 00 55 49 89 ca
[66911.392812] RSP: 0018:ffffa62cc0003e70 EFLAGS: 00010282
[66911.392813] RAX: 0000000000000000 RBX: ffff9b1394cbc000 RCX: ffff9b1a7e220588
[66911.392814] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9b1a7e220580
[66911.392815] RBP: ffffa62cc0003ea8 R08: 0000000000000003 R09: 0000000000000001
[66911.392816] R10: 0000000000ffff0a R11: 0000000000000001 R12: 0000000000000000
[66911.392816] R13: ffff9b1380fc3880 R14: 0000000000000001 R15: ffff9b1394cbc4c0
[66911.392817] FS:  0000000000000000(0000) GS:ffff9b1a7e200000(0000) knlGS:0000000000000000
[66911.392818] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[66911.392819] CR2: 00007ff432b1e000 CR3: 00000007db410002 CR4: 00000000001726f0
[66911.392821] Call Trace:
[66911.392822]  <IRQ>
[66911.392824]  ? pfifo_fast_enqueue+0x150/0x150
[66911.392826]  call_timer_fn+0x2b/0x120
[66911.392830]  __run_timers.part.0+0x1dd/0x270
[66911.392832]  ? ktime_get+0x46/0xc0
[66911.392834]  ? lapic_next_event+0x21/0x30
[66911.392838]  ? clockevents_program_event+0xa7/0x120
[66911.392840]  run_timer_softirq+0x2a/0x50
[66911.392842]  __do_softirq+0xd9/0x2e6
[66911.392846]  irq_exit_rcu+0x8c/0xb0
[66911.392850]  sysvec_apic_timer_interrupt+0x7c/0x90
[66911.392852]  </IRQ>
[66911.392853]  <TASK>
[66911.392853]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[66911.392855] RIP: 0010:cpuidle_enter_state+0xd9/0x620
[66911.392859] Code: 3d 24 54 c3 6e e8 d7 8c 71 ff 49 89 c7 0f 1f 44 00 00 31 ff e8 38 99 71 ff 80 7d d0 00 0f 85 5a 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 f6 0f 88 66 01 00 00 4d 63 ee 49 83 fd 09 0f 87 e1 03 00 00
[66911.392860] RSP: 0018:ffffffff92603da0 EFLAGS: 00000246
[66911.392861] RAX: ffff9b1a7e230b40 RBX: ffffc62cbfc25900 RCX: 0000000000000000
[66911.392862] RDX: 0000000000001e6f RSI: 0000000025bbf914 RDI: 0000000000000000
[66911.392863] RBP: ffffffff92603df0 R08: 00003cdb05cacc9d R09: 0000000000061a80
[66911.392864] R10: 0000000000000006 R11: 071c71c71c71c71c R12: ffffffff928d3a80
[66911.392864] R13: 0000000000000003 R14: 0000000000000003 R15: 00003cdb05cacc9d
[66911.392866]  cpuidle_enter+0x2e/0x40
[66911.392868]  do_idle+0x209/0x2b0
[66911.392871]  cpu_startup_entry+0x20/0x30
[66911.392872]  rest_init+0xd3/0x100
[66911.392874]  ? acpi_enable_subsystem+0x20b/0x213
[66911.392878]  arch_call_rest_init+0xe/0x1b
[66911.392880]  start_kernel+0x9c5/0x9eb
[66911.392882]  x86_64_start_reservations+0x24/0x26
[66911.392884]  x86_64_start_kernel+0xe4/0xeb
[66911.392886]  secondary_startup_64_no_verify+0xc2/0xcb
[66911.392889]  </TASK>
[66911.392890] ---[ end trace 969d8917868b5e04 ]---
[66911.392898] e1000e 0000:00:19.0 enp0s25: Reset adapter unexpectedly
[66911.486232] vmbr0: port 1(enp0s25) entered disabled state
[66915.202980] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[66915.203023] vmbr0: port 1(enp0s25) entered blocking state
[66915.203027] vmbr0: port 1(enp0s25) entered forwarding state
[73088.336154] vmbr0: port 5(tap103i0) entered disabled state

fiona · May 23, 2022

Hi,
maybe it triggered with the upgrade for some reason, but the issue itself (assuming this is the same) is much older. Here is a workaround and much more information.

frankz · May 23, 2022

Fabian_E said:
Hi,
maybe it triggered with the upgrade for some reason, but the issue itself (assuming this is the same) is much older. Here is a workaround and much more information.

At the moment thanks, Anyway I'm waiting for a new kernel update

Search

Search

Latest updates and crashes e1000

frankz

Well-Known Member

fiona

Proxmox Staff Member

frankz

Well-Known Member

We value your privacy