Hi there. I've spent the last few days using the latest 2.0 baremetal installation and it's been fantastic, both for running containers and kvms. Today, I installed the pve 2.6.32-6 kernel + related applications on top of debian 6.0.3 (following the instructions here: http://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Squeeze) as I wanted to use a customised partition layout. I can create and run containers but when I attempt to start a vm I get the error below. Two other points:
- if I run 'lsmod | grep kvm' it returns kvm_intel and kvm so it appears the modules are loaded, notwithstanding the error message. VT-x is enabled in the bios and I've never had any trouble creating and running kvm vms before.
- the vm config below is identical to what I was using on the baremetal version where it worked fine
Can anyone help me with this (I've had a look through the forum posts but couldn't find this exact problem - apologies if I've missed anything)?
- if I run 'lsmod | grep kvm' it returns kvm_intel and kvm so it appears the modules are loaded, notwithstanding the error message. VT-x is enabled in the bios and I've never had any trouble creating and running kvm vms before.
- the vm config below is identical to what I was using on the baremetal version where it worked fine
Can anyone help me with this (I've had a look through the forum posts but couldn't find this exact problem - apologies if I've missed anything)?
Code:
Could not access KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory
No accelerator found!
TASK
ERROR: start failed: command '/usr/bin/kvm -id 100 -chardev
socket,id=monitor,path=/var/run/qemu-server/100.mon,server,nowait -mon
chardev=monitor,mode=readline -vnc
unix:/var/run/qemu-server/100.vnc,x509,password -pidfile
/var/run/qemu-server/100.pid -daemonize -readconfig
/usr/share/qemu-server/pve-usb.cfg -device usb-tablet,bus=ehci.0,port=6
-name kvm0 -smp sockets=1,cores=1 -nodefaults -boot menu=on,order=cdn
-vga cirrus -tdf -k en-us -drive
file=/var/lib/vz/template/iso/CentOS-6.0-x86_64-minimal.iso,if=none,id=drive-ide2,media=cdrom,aio=native
-device ide-drive,bus=ide.1,unit=0,drive=drive-ide2,id=device-ide2 -drive
file=/dev/vm/vm-100-disk-1,if=none,id=drive-virtio0,aio=native,boot=on
-device virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa -m 768 -netdev
type=tap,id=net0,ifname=tap100i0,script=/var/lib/qemu-server/pve-bridge -device
virtio-net-pci,romfile=,mac=9A:B0:CD:34:5B:19,netdev=net0,bus=pci.0,addr=0x12'
failed: exit code 1