Hi,
Somehow i can´t get the backup feature to work.
Trying to (manually) backup a KVM on top of lvm/iscsi to local storage. With a 10GB VM it works with acceptable throughput of about 50MB/sec.
However with bigger machines, it does not come to an end. Either with one or two lvm disks associated to a VM.
Thx,
Proxman
Somehow i can´t get the backup feature to work.
Trying to (manually) backup a KVM on top of lvm/iscsi to local storage. With a 10GB VM it works with acceptable throughput of about 50MB/sec.
However with bigger machines, it does not come to an end. Either with one or two lvm disks associated to a VM.
Code:
INFO: starting new backup job: vzdump 100 --remove 0 --mode snapshot --compress lzo --storage local --node obe-pve01INFO: Starting Backup of VM 100 (qemu)
INFO: status = running
INFO: backup mode: snapshot
INFO: ionice priority: 7
INFO: suspend vm to make snapshot
INFO: Logical volume "vzsnap-pve01-0" created
INFO: Logical volume "vzsnap-pve01-1" created
INFO: resume vm
INFO: vm is online again after 1 seconds
INFO: creating archive '/var/lib/vz/dump/vzdump-qemu-100-2012_08_28-14_37_00.tar.lzo'
INFO: adding '/var/lib/vz/dump/vzdump-qemu-100-2012_08_28-14_37_00.tmp/qemu-server.conf' to archive ('qemu-server.conf')
INFO: adding '/dev/obe_pve_lvm/vzsnap-pve01-0' to archive ('vm-disk-virtio1.raw')
INFO: adding '/dev/obe_pve_lvm/vzsnap-pve01-1' to archive ('vm-disk-virtio0.raw')
- How to stop the running backup task? (machine is locked trough it running)?
- What can be the problem, what information may i provide?
Thx,
Proxman