Hi all..
There is also another post here referring to what could like my issue.. but i didn't want ti potentially hijack the OP thread so i made a new one and figured i would link his thread here:
http://forum.proxmox.com/threads/17598-vmbr0-port-10(tap109i0)-entering-disabled-state
I have this entry about every hour along with some other information i don't know is relevant..
about 6:50
than about 7:50
and than about 8:50
I have 3 nodes
proxmox00
proxmox01
proxmox02
the error is happening on both 01 and 02.. and they are the only one running VMs
There is a template and a turned off vm on prox00 so maybe its related to running VMs.. in any case i will power on the vm on prox00 to see what happens..
Also i have two HP 1810-g24 V2 switches running latest firmware connected with 4 ports in LACP where switch 1 is set to LACP-Active and switch 2 is LACP-Passiv.
I have two NAS synlogy DS1513+ connected to the switch one for vm,iso and template storage and the other for backup. The storage NAS is connected with 4 1gb cables two in each switches configured with LACP. In this setup the Switch is running LACP static on the 4 ports connecting the storage nas.
Backup nas is connected to each switch with only 1 cable in each switch with LACP and the switch ports sets to LACP-Static...
also because I had returning traffic on my bridges i added this to the /etc/network/interfaces file
so that it looks like this
this was because of user in the forum reporting the same problems i had
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=559879
and found the solution here:
http://ubuntuforums.org/showthread.php?t=1565074
Anyone has any suggestions what is happening?
THANKS
Casper
There is also another post here referring to what could like my issue.. but i didn't want ti potentially hijack the OP thread so i made a new one and figured i would link his thread here:
http://forum.proxmox.com/threads/17598-vmbr0-port-10(tap109i0)-entering-disabled-state
I have this entry about every hour along with some other information i don't know is relevant..
about 6:50
Code:
Jan 21 06:49:55 proxmox01 kernel: vmbr0: port 4(tap107i0) entering disabled stateJan 21 06:49:55 proxmox01 kernel: vmbr0: port 4(tap107i0) entering disabled state
Jan 21 06:49:57 proxmox01 ntpd[2378]: Deleting interface #19 tap107i0, fe80::ac93:a5ff:fe8c:8337#123, interface stats: received=0, sent=0, dropped=0, active_time=3622 secs
Jan 21 06:49:57 proxmox01 ntpd[2378]: peers refreshed
Jan 21 06:50:01 proxmox01 rgmanager[165883]: [pvevm] VM 104 is running
Jan 21 06:50:01 proxmox01 rgmanager[165903]: [pvevm] VM 112 is running
Jan 21 06:50:11 proxmox01 rgmanager[165943]: [pvevm] VM 112 is running
Jan 21 06:50:21 proxmox01 rgmanager[165977]: [pvevm] VM 107 is not running
Jan 21 06:50:21 proxmox01 rgmanager[2937]: status on pvevm "107" returned 7 (unspecified)
Jan 21 06:50:22 proxmox01 rgmanager[2937]: Stopping service pvevm:107
Jan 21 06:50:23 proxmox01 rgmanager[165998]: [pvevm] VM 107 is already stopped
Jan 21 06:50:23 proxmox01 rgmanager[2937]: Service pvevm:107 is recovering
Jan 21 06:50:24 proxmox01 rgmanager[2937]: Recovering failed service pvevm:107
Jan 21 06:50:24 proxmox01 task UPID:proxmox01:00028884:003D5134:52DE0AA0:qmstart:107:root@pam:: start VM 107: UPID:proxmox01:00028884:003D5134:52DE0AA0:qmstart:107:root@pam:
Jan 21 06:50:24 proxmox01 pvevm: <root@pam> starting task UPID:proxmox01:00028884:003D5134:52DE0AA0:qmstart:107:root@pam:
Jan 21 06:50:25 proxmox01 kernel: device tap107i0 entered promiscuous mode
Jan 21 06:50:25 proxmox01 kernel: vmbr0: port 4(tap107i0) entering forwarding state
Jan 21 06:50:25 proxmox01 rgmanager[166042]: [pvevm] Task still active, waiting
Jan 21 06:50:25 proxmox01 pvevm: <root@pam> end task UPID:proxmox01:00028884:003D5134:52DE0AA0:qmstart:107:root@pam: OK
Jan 21 06:50:26 proxmox01 rgmanager[2937]: Service pvevm:107 started
Jan 21 06:50:28 proxmox01 ntpd[2378]: Listen normally on 20 tap107i0 fe80::20a4:bbff:fee6:2cb9 UDP 123
Jan 21 06:50:28 proxmox01 ntpd[2378]: peers refreshed
Jan 21 06:50:35 proxmox01 kernel: tap107i0: no IPv6 routers present
than about 7:50
Code:
Jan 21 07:50:56 proxmox01 kernel: vmbr0: port 4(tap107i0) entering disabled stateJan 21 07:50:56 proxmox01 kernel: vmbr0: port 4(tap107i0) entering disabled state
Jan 21 07:50:58 proxmox01 ntpd[2378]: Deleting interface #20 tap107i0, fe80::20a4:bbff:fee6:2cb9#123, interface stats: received=0, sent=0, dropped=0, active_time=3630 secs
Jan 21 07:50:58 proxmox01 ntpd[2378]: peers refreshed
Jan 21 07:51:04 proxmox01 rgmanager[180670]: [pvevm] VM 104 is running
Jan 21 07:51:04 proxmox01 rgmanager[180689]: [pvevm] VM 112 is running
Jan 21 07:51:14 proxmox01 rgmanager[180731]: [pvevm] VM 107 is not running
Jan 21 07:51:14 proxmox01 rgmanager[2937]: status on pvevm "107" returned 7 (unspecified)
Jan 21 07:51:15 proxmox01 rgmanager[180751]: [pvevm] VM 112 is running
Jan 21 07:51:15 proxmox01 rgmanager[2937]: Stopping service pvevm:107
Jan 21 07:51:16 proxmox01 rgmanager[180772]: [pvevm] VM 107 is already stopped
Jan 21 07:51:16 proxmox01 rgmanager[2937]: Service pvevm:107 is recovering
Jan 21 07:51:17 proxmox01 rgmanager[2937]: Recovering failed service pvevm:107
Jan 21 07:51:18 proxmox01 task UPID:proxmox01:0002C23A:0042E451:52DE18E6:qmstart:107:root@pam:: start VM 107: UPID:proxmox01:0002C23A:0042E451:52DE18E6:qmstart:107:root@pam:
Jan 21 07:51:18 proxmox01 pvevm: <root@pam> starting task UPID:proxmox01:0002C23A:0042E451:52DE18E6:qmstart:107:root@pam:
Jan 21 07:51:18 proxmox01 kernel: device tap107i0 entered promiscuous mode
Jan 21 07:51:18 proxmox01 kernel: vmbr0: port 4(tap107i0) entering forwarding state
Jan 21 07:51:19 proxmox01 rgmanager[180816]: [pvevm] Task still active, waiting
Jan 21 07:51:19 proxmox01 pvevm: <root@pam> end task UPID:proxmox01:0002C23A:0042E451:52DE18E6:qmstart:107:root@pam: OK
Jan 21 07:51:19 proxmox01 rgmanager[2937]: Service pvevm:107 started
Jan 21 07:51:21 proxmox01 ntpd[2378]: Listen normally on 21 tap107i0 fe80::d87c:49ff:fe41:5e38 UDP 123
Jan 21 07:51:21 proxmox01 ntpd[2378]: peers refreshed
Jan 21 07:51:24 proxmox01 rgmanager[180853]: [pvevm] VM 104 is running
Jan 21 07:51:28 proxmox01 kernel: tap107i0: no IPv6 routers present
and than about 8:50
Code:
Jan 21 08:51:48 proxmox01 kernel: vmbr0: port 4(tap107i0) entering disabled stateJan 21 08:51:48 proxmox01 kernel: vmbr0: port 4(tap107i0) entering disabled state
Jan 21 08:51:50 proxmox01 ntpd[2378]: Deleting interface #21 tap107i0, fe80::d87c:49ff:fe41:5e38#123, interface stats: received=0, sent=0, dropped=0, active_time=3629 secs
Jan 21 08:51:50 proxmox01 ntpd[2378]: peers refreshed
Jan 21 08:51:58 proxmox01 rgmanager[195272]: [pvevm] VM 107 is not running
Jan 21 08:51:58 proxmox01 rgmanager[2937]: status on pvevm "107" returned 7 (unspecified)
Jan 21 08:51:58 proxmox01 rgmanager[195288]: [pvevm] VM 112 is running
Jan 21 08:51:59 proxmox01 rgmanager[2937]: Stopping service pvevm:107
Jan 21 08:51:59 proxmox01 rgmanager[195322]: [pvevm] VM 107 is already stopped
Jan 21 08:51:59 proxmox01 rgmanager[2937]: Service pvevm:107 is recovering
Jan 21 08:52:00 proxmox01 rgmanager[2937]: Recovering failed service pvevm:107
Jan 21 08:52:01 proxmox01 task UPID:proxmox01:0002FB10:00487378:52DE2721:qmstart:107:root@pam:: start VM 107: UPID:proxmox01:0002FB10:00487378:52DE2721:qmstart:107:root@pam:
Jan 21 08:52:01 proxmox01 pvevm: <root@pam> starting task UPID:proxmox01:0002FB10:00487378:52DE2721:qmstart:107:root@pam:
Jan 21 08:52:02 proxmox01 kernel: device tap107i0 entered promiscuous mode
Jan 21 08:52:02 proxmox01 kernel: vmbr0: port 4(tap107i0) entering forwarding state
Jan 21 08:52:02 proxmox01 rgmanager[195366]: [pvevm] Task still active, waiting
Jan 21 08:52:02 proxmox01 pvevm: <root@pam> end task UPID:proxmox01:0002FB10:00487378:52DE2721:qmstart:107:root@pam: OK
Jan 21 08:52:02 proxmox01 rgmanager[2937]: Service pvevm:107 started
Jan 21 08:52:05 proxmox01 ntpd[2378]: Listen normally on 22 tap107i0 fe80::947d:4bff:fec3:b083 UDP 123
Jan 21 08:52:05 proxmox01 ntpd[2378]: peers refreshed
Jan 21 08:52:12 proxmox01 kernel: tap107i0: no IPv6 routers present
I have 3 nodes
proxmox00
proxmox01
proxmox02
the error is happening on both 01 and 02.. and they are the only one running VMs
There is a template and a turned off vm on prox00 so maybe its related to running VMs.. in any case i will power on the vm on prox00 to see what happens..
Also i have two HP 1810-g24 V2 switches running latest firmware connected with 4 ports in LACP where switch 1 is set to LACP-Active and switch 2 is LACP-Passiv.
I have two NAS synlogy DS1513+ connected to the switch one for vm,iso and template storage and the other for backup. The storage NAS is connected with 4 1gb cables two in each switches configured with LACP. In this setup the Switch is running LACP static on the 4 ports connecting the storage nas.
Backup nas is connected to each switch with only 1 cable in each switch with LACP and the switch ports sets to LACP-Static...
also because I had returning traffic on my bridges i added this to the /etc/network/interfaces file
Code:
bridge_maxage 0 bridge_ageing 0
bridge_maxwait 0
so that it looks like this
Code:
offerlam[20-01-2014 19:50:58] offerlam: auto vmbr0
iface vmbr0 inet static
address 10.10.99.20
netmask 255.255.255.0
gateway 10.10.99.1
bridge_ports bond0
bridge_stp off
bridge_fd 0
bridge_maxage 0
bridge_ageing 0
bridge_maxwait 0
this was because of user in the forum reporting the same problems i had
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=559879
and found the solution here:
http://ubuntuforums.org/showthread.php?t=1565074
Anyone has any suggestions what is happening?
THANKS
Casper
Last edited: