Hello,
After booting into the recent Proxmox kernel 7.0.14-23-pve, my system encounters critical hardware and storage errors during startup, forcing it into an unstable state. Reverting to kernel 6.8.12-43-pve completely resolves the issue.
Hardware Specs:
[ 2.311073] zfs: module license 'CDDL' taints kernel.
[ 2.923062] ZFS: Loaded module v2.2.10-pve1, ZFS pool version 5000... (also encountered 'Key was rejected by service' via systemd-modules-load)
[ 0.729384] ata5: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19300 irq 31 lpm-pol 0
[ ... ] ata5.00: exception Emask 0x70 SAct 0x20000000 SErr 0x440900 action 0x6
[ ... ] ata5.00: irq_stat 0x28000000, host bus error, interface fatal error
Full kernel bug report log:
root@proxmox:~# dmesg | grep -E -i "ata5|zfs|error|fail|dmar" > ~/proxmox_kernel_bug_report.txt && cat ~/proxmox_kernel_bug_report.txt
[ 0.006520] ACPI: DMAR 0x00000000D73F0A70 0000B8 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.006531] ACPI: Reserving DMAR table memory at [mem 0xd73f0a70-0xd73f0b27]
[ 0.096954] DMAR: Host address width 39
[ 0.096955] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.096961] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.096963] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.096965] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.096966] DMAR: RMRR base: 0x000000d9e7c000 end: 0x000000d9e8afff
[ 0.096969] DMAR: RMRR base: 0x000000db000000 end: 0x000000df1fffff
[ 0.096971] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.096972] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.096972] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.096973] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.097468] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.234312] DMAR: No ATSR found
[ 0.234313] DMAR: No SATC found
[ 0.234314] DMAR: IOMMU feature pgsel_inv inconsistent
[ 0.234316] DMAR: IOMMU feature sc_support inconsistent
[ 0.234317] DMAR: IOMMU feature pass_through inconsistent
[ 0.234318] DMAR: dmar0: Using Queued invalidation
[ 0.234323] DMAR: dmar1: Using Queued invalidation
[ 0.294973] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.545408] RAS: Correctable Errors collector initialized.
[ 0.729384] ata5: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19300 irq 31 lpm-pol 0
[ 1.038266] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.040145] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[ 1.040149] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.040415] ata5.00: supports DRM functions and may not be fully accessible
[ 1.040417] ata5.00: ATA-9: Samsung SSD 750 EVO 120GB, MAT01B6Q, max UDMA/133
[ 1.040958] ata5.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.042837] ata5.00: Features: Trust Dev-Sleep NCQ-sndrcv
[ 1.043331] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[ 1.043343] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.043546] ata5.00: supports DRM functions and may not be fully accessible
[ 1.046036] ata5.00: configured for UDMA/133
[ 2.311073] zfs: module license 'CDDL' taints kernel.
[ 2.311094] zfs: module license taints kernel.
[ 2.923062] ZFS: Loaded module v2.2.10-pve1, ZFS pool version 5000, ZFS filesystem version 5
[ 3.386667] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory
[ 13.618694] EXT4-fs warning (device dm-10): ext4_clear_journal_err:6344: Filesystem error recorded from previous mount: IO failure
[ 13.620791] EXT4-fs (dm-10): warning: mounting fs with errors, running e2fsck is recommended
[ 13.621788] EXT4-fs (dm-10): Errors on filesystem, clearing orphan list.
[ 15.849148] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 15.849157] cfg80211: failed to load regulatory.db
[ 333.088270] EXT4-fs (dm-10): error count since last fsck: 6
[ 333.088277] EXT4-fs (dm-10): initial error at time 1791826133: ext4_orphan_add:186
[ 333.088280] EXT4-fs (dm-10): last error at time 1791826133: ext4_journal_check_start:86
Has anyone experienced similar DMA/IOMMU or SATA controller (ata5) regressions on older Haswell platforms with the version 7 kernel?
After booting into the recent Proxmox kernel 7.0.14-23-pve, my system encounters critical hardware and storage errors during startup, forcing it into an unstable state. Reverting to kernel 6.8.12-43-pve completely resolves the issue.
Hardware Specs:
- CPU: Intel Core i7-4790K
- Motherboard chipset: Intel Z97 / 9-series
[ 2.311073] zfs: module license 'CDDL' taints kernel.
[ 2.923062] ZFS: Loaded module v2.2.10-pve1, ZFS pool version 5000... (also encountered 'Key was rejected by service' via systemd-modules-load)
[ 0.729384] ata5: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19300 irq 31 lpm-pol 0
[ ... ] ata5.00: exception Emask 0x70 SAct 0x20000000 SErr 0x440900 action 0x6
[ ... ] ata5.00: irq_stat 0x28000000, host bus error, interface fatal error
Full kernel bug report log:
root@proxmox:~# dmesg | grep -E -i "ata5|zfs|error|fail|dmar" > ~/proxmox_kernel_bug_report.txt && cat ~/proxmox_kernel_bug_report.txt
[ 0.006520] ACPI: DMAR 0x00000000D73F0A70 0000B8 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.006531] ACPI: Reserving DMAR table memory at [mem 0xd73f0a70-0xd73f0b27]
[ 0.096954] DMAR: Host address width 39
[ 0.096955] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.096961] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.096963] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.096965] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.096966] DMAR: RMRR base: 0x000000d9e7c000 end: 0x000000d9e8afff
[ 0.096969] DMAR: RMRR base: 0x000000db000000 end: 0x000000df1fffff
[ 0.096971] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.096972] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.096972] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.096973] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.097468] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.234312] DMAR: No ATSR found
[ 0.234313] DMAR: No SATC found
[ 0.234314] DMAR: IOMMU feature pgsel_inv inconsistent
[ 0.234316] DMAR: IOMMU feature sc_support inconsistent
[ 0.234317] DMAR: IOMMU feature pass_through inconsistent
[ 0.234318] DMAR: dmar0: Using Queued invalidation
[ 0.234323] DMAR: dmar1: Using Queued invalidation
[ 0.294973] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.545408] RAS: Correctable Errors collector initialized.
[ 0.729384] ata5: SATA max UDMA/133 abar m2048@0xf7d19000 port 0xf7d19300 irq 31 lpm-pol 0
[ 1.038266] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.040145] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[ 1.040149] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.040415] ata5.00: supports DRM functions and may not be fully accessible
[ 1.040417] ata5.00: ATA-9: Samsung SSD 750 EVO 120GB, MAT01B6Q, max UDMA/133
[ 1.040958] ata5.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.042837] ata5.00: Features: Trust Dev-Sleep NCQ-sndrcv
[ 1.043331] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[ 1.043343] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.043546] ata5.00: supports DRM functions and may not be fully accessible
[ 1.046036] ata5.00: configured for UDMA/133
[ 2.311073] zfs: module license 'CDDL' taints kernel.
[ 2.311094] zfs: module license taints kernel.
[ 2.923062] ZFS: Loaded module v2.2.10-pve1, ZFS pool version 5000, ZFS filesystem version 5
[ 3.386667] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory
[ 13.618694] EXT4-fs warning (device dm-10): ext4_clear_journal_err:6344: Filesystem error recorded from previous mount: IO failure
[ 13.620791] EXT4-fs (dm-10): warning: mounting fs with errors, running e2fsck is recommended
[ 13.621788] EXT4-fs (dm-10): Errors on filesystem, clearing orphan list.
[ 15.849148] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 15.849157] cfg80211: failed to load regulatory.db
[ 333.088270] EXT4-fs (dm-10): error count since last fsck: 6
[ 333.088277] EXT4-fs (dm-10): initial error at time 1791826133: ext4_orphan_add:186
[ 333.088280] EXT4-fs (dm-10): last error at time 1791826133: ext4_journal_check_start:86
Has anyone experienced similar DMA/IOMMU or SATA controller (ata5) regressions on older Haswell platforms with the version 7 kernel?