Job for corosync.service failed when adding node

[Amori]

Hello,
I have 3 new servers with latest proxmox

proxmox-ve: 4.2-56 (running kernel: 4.4.13-1-pve)
pve-manager: 4.2-15 (running version: 4.2-15/6669ad2c)
pve-kernel-4.4.13-1-pve: 4.4.13-56
lvm2: 2.02.116-pve2
corosync-pve: 2.3.5-2
libqb0: 1.0-1
pve-cluster: 4.0-42
qemu-server: 4.0-83
pve-firmware: 1.1-8
libpve-common-perl: 4.0-70
libpve-access-control: 4.0-16
libpve-storage-perl: 4.0-55
pve-libspice-server1: 0.12.5-2
vncterm: 1.2-1
pve-qemu-kvm: 2.5-19
pve-container: 1.0-70
pve-firewall: 2.0-29
pve-ha-manager: 1.0-32
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u2
lxc-pve: 1.1.5-7
lxcfs: 2.0.0-pve2
cgmanager: 0.39-pve1
criu: 1.6.0-1

I created cluster, and was able to add the second node.
now getting errors when adding the third one

root@ss3:~# pvecm add xx.xx.34.126 --force
can't create shared ssh key database '/etc/pve/priv/authorized_keys'
copy corosync auth key
stopping pve-cluster service
backup old database
Job for corosync.service failed. See 'systemctl status corosync.service' and 'journalctl -xn' for de                    tails.
waiting for quorum...

I tried to remove the node and adding it again with --force but not working


Any advice?

 

[Amori]

Anyone?

 

[markusd]

I would look at the output from
"pvecm status" first

Markus

 

[Amori]

I would look at the output from
"pvecm status" first

Markus

Thanks for replay, The output is

root@sd-98080:/home/# pvecm status
Cannot initialize CMAP service
root@sd-98080:/home/# ^C
root@sd-98080:/home/# ^C
root@sd-98080:/home/# systemctl status corosync.service
● corosync.service - Corosync Cluster Engine
   Loaded: loaded (/lib/systemd/system/corosync.service; enabled)
   Active: failed (Result: exit-code) since Sun 2016-07-03 13:30:58 CEST; 1h 35min ago
  Process: 1256 ExecStart=/usr/share/corosync/corosync start (code=exited, status=1/FAILURE)

Jul 03 13:29:58 sd-98080 corosync[1263]: [QB    ] server name: cpg
Jul 03 13:29:58 sd-98080 corosync[1263]: [SERV  ] Service engine loaded: corosync profile lo...[4]
Jul 03 13:29:58 sd-98080 corosync[1263]: [QUORUM] Using quorum provider corosync_votequorum
Jul 03 13:29:58 sd-98080 corosync[1263]: [QUORUM] Quorum provider: corosync_votequorum faile...ze.
Jul 03 13:29:58 sd-98080 corosync[1263]: [SERV  ] Service engine 'corosync_quorum' failed to...d!'
Jul 03 13:29:58 sd-98080 corosync[1263]: [MAIN  ] Corosync Cluster Engine exiting with statu...56.
Jul 03 13:30:58 sd-98080 corosync[1256]: Starting Corosync Cluster Engine (corosync): [FAILED]
Jul 03 13:30:58 sd-98080 systemd[1]: corosync.service: control process exited, code=exited ...us=1
Jul 03 13:30:58 sd-98080 systemd[1]: Failed to start Corosync Cluster Engine.
Jul 03 13:30:58 sd-98080 systemd[1]: Unit corosync.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.

On the cluster node

Quorum information
------------------
Date:             Sun Jul  3 15:32:58 2016
Quorum provider:  corosync_votequorum
Nodes:            2
Node ID:          0x00000001
Ring ID:          40
Quorate:          Yes

Votequorum information
----------------------
Expected votes:   3
Highest expected: 3
Total votes:      2
Quorum:           2
Flags:            Quorate

Membership information
----------------------
    Nodeid      Votes Name
0x00000001          1 xx.xx.34.126 (local)
0x00000002          1 xx.xx.34.162

 

[markusd]

You have looked here:
http://pve.proxmox.com/wiki/Proxmox_VE_4.x_Cluster#Troubleshooting
?

Is all ok with your /etc/hosts ?
Seems that /etc/pve is not mounted on your third host
Could be an idea to reinstall this node and try again..

Markus

 

[EVoto Team]

I have the same problem ... any solution?