I am running a cluster on a set of Dell PowerEdge R340s with Xeon E-2136 and 32Gb of ram. After upgrading a single node it no longer boot when using 6.5.11+.
I have always had secure boot disabled and can boot using the 6.2.16-19-pve kernel. I use the GUI upgrade button which runs dist-upgrade.
I have checked for any blocked modules and all I have are the nvidia and amd modules for a gpu passthrough.
The system hangs showing `loading initial ramdisk`. Adding `debug=all` to the startup has shown that lvm is closed after the initrd loads as shown in the screenshot. This is true for 6.5.11-4 and later.
I have always had secure boot disabled and can boot using the 6.2.16-19-pve kernel. I use the GUI upgrade button which runs dist-upgrade.
I have checked for any blocked modules and all I have are the nvidia and amd modules for a gpu passthrough.
The system hangs showing `loading initial ramdisk`. Adding `debug=all` to the startup has shown that lvm is closed after the initrd loads as shown in the screenshot. This is true for 6.5.11-4 and later.