[SOLVED] Issue with p2v server 2003

[killmasta93]

Hi Currently im trying to p2v a dell server which has an old software that they dont make anymore, before hand i installed the merg.reg file and converted it using the vmware converter standalone

then imported the running the qm importdisk 102 server.vhdx local-zfs

when it starts to boot up i get the blue screen



this is my vmconf

root@prometheus:~# cat /etc/pve/qemu-server/102.conf
boot: order=ide0
cores: 2
ide0: local-zfs:vm-102-disk-1,size=278783M
machine: pc-i440fx-5.2
memory: 3048
name: server2003
net0: rtl8139=7A:ED:D9:EB:98:B4,bridge=vmbr0,link_down=1
numa: 0
ostype: wxp
smbios1: uuid=5eded755-6369-4a80-9580-34e2a311429d
sockets: 1
usb0: host=1058:25a2
vmgenid: 56d6977e-0aff-43ab-8345-deb637268d71

i have done a few p2v but this has stumped me
in this picture shows the server that has dell perc running its own RAID not sure if that is the conflict?

Thank you

 

[LnxBil]

Yes, could be. 0x7b is inaccessible boot device.

 

[k-123]

just migrate a windows 2003 server from esxi to pve, using this article to prepare.
(other methods I found all leads to 0x0000007b bsod)
https://backdrift.org/converting-windows-guests-from-vmware-esx-to-kvm-with-virtio-drivers

 

[killmasta93]

Thanks for the reply, the issue was that in the system32 folder of the drivers i needed to add intelide.sys rebooted and it worked
Thank you