ipv6 in proxmox 8

[shinichi kudo]

hi
i get hetzner server and installed proxmox 8.1,, i note that whatever the tutorial i follow to setup ipv6 as routed and use it on vms not workin even the stteps in hetzner site to install proxmox,,

i tried alot of methods only ipv4 work ,

any help for that ,,, i want only 3 vm which contains linux mint and connected by ipv6 only ??

i tried
https://community.hetzner.com/tutorials/install-and-configure-proxmox_ve

and
https://forum.proxmox.com/threads/proxmox-with-hetzner-what-a-love-story.127065/

and alot others, nothing work on proxmox 8.1

 

[andaga]

My only recommendation! Don't use Hetzner! lol hahahaha
Seriously! I can't help you on this! Have you contacted Hetzner support?

 

[shinichi kudo]

I think it related to proxmox ,, the ipv6 only work on the proxmox host server but i can't route it to any vm

Also, it work in version 7

 

[andaga]

I use IPV6 also and it work perfectly on my proxmox 8.1

Do you have any more info and screenshot of your config to show us?

 

[shinichi kudo]

i use all of the guides here

https://community.hetzner.com/tutorials/install-and-configure-proxmox_ve

and
https://forum.proxmox.com/threads/proxmox-with-hetzner-what-a-love-story.127065/

last current config as following

auto lo
iface lo inet loopback

iface lo inet6 loopback

iface enp7s0 inet manual
auto vmbr0
iface vmbr0 inet static
        address 122.122.122.166/26
        bridge-ports enp7s0
        bridge-stp off
        bridge-fd 0
        gateway 122.122.122.100
        post-up echo 1 > /proc/sys/net/ipv4/ip_forward
        post-up echo 1 > /proc/sys/net/ipv4/conf/enp7s0/proxy_arp
post-up   iptables -t raw -I PREROUTING -i fwbr+ -j CT --zone 1
post-down iptables -t raw -D PREROUTING -i fwbr+ -j CT --zone 1


iface vmbr0 inet6 static
        address aaaa:aaaa:aaaa:aaaa::2/64
        gateway aaaa::1
up ip -6 route add aaaa:aaaa:aaaa:aaaa::/64 dev vmbr0
#up ip route add default via aaaa:aaaa:aaaa:aaaa::2

source /etc/network/interfaces.d/*

i enabled forward in the file /etc/sysctl.conf


ipv6 only work when i assign it to proxmox it self ,,
could you please guide me how to setup ipv6 correct way

 

[proxnoci]

You need the IP address (IPv4 or IPv6) on the vmbr0 to be correct, to access your host.
The hetzner method might be to migrate from a host with a native network adapter with given IP address to one with the address on the virtual bridge.
( I have IPaddress/24 (= actual netmask) for Ipv4 on the vmbr0 to access the host)

 

[proxnoci]

An external router handles routing between VLAN's using a 802.1q tagged vlan through eno0.
The VMBR's have interface as far as needed.
(There are a few more VLAN's for example to access a storage NAS, but it's configuration doesn't add to explaing the basics.)
The Storage LAN also has an IP address to allow for mounting iscsi devices on the procmox host.

# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!


auto lo
iface lo inet loopback


auto eno0
iface eno0 inet manual
#LAN


auto vmbr0
iface vmbr0 inet static
        address 192.168.X.2/24
        gateway 192.168.X.1
        bridge-ports eno0
        bridge-stp off
        bridge-fd 0
#LAN


iface vmbr0 inet6 static
        address XXXXX::192:168:X:2/64
        gateway XXXXX::1


iface wlp1s0 inet manual


auto vlan11 manual
iface vlan11 inet
   mtu 1500
   vlan-raw-device eno0


auto vmbr11
iface vmbr11 inet manual
        bridge-ports vlan11
        bridge-stp off
        bridge-fd 0
#Guest



auto vlan101
iface vlan101 inet manual
        vlan-raw-device eno0
#Unconnected VLAN ( connected to eno0 to allow for migrating to another proxmox node)

auto vmbr101
iface vmbr11 inet manual
        bridge-ports vlan101
        bridge-stp off
        bridge-fd 0