Hello,
So to explain the environment as follows:
Both servers have a connection to the internet with public IP's and are added to a single cluster.
Server 1 has a separate NIC with a cable connected to server 2 (Has IP 10.10.10.5)
Server 2 uses second same nic with the second port connected to server one (Has IP 10.10.10.15)
So basically there is an ethernet cable connected directly from server 1 to server 2
I can ping 10.10.10.5 (server1) from 10.10.10.15 (server2) the problem is that I want to give a VM on server connection using that cable so for instance the VM would have IP (10.10.10.20) I did try to make Bridges on each server and it worked and I could ping the bridges and nic IPs from each server but once I create a VM and give it the bridge as a network then go into the VM (in this case Prxmox backup) and edit the network setting to only have IP and not gateway I can not ping our from the VM at all.
Is there a good way I can do this and I want my backups to run over that directly connected cable as the cluster already communicates on that fine.
So to explain the environment as follows:
Both servers have a connection to the internet with public IP's and are added to a single cluster.
Server 1 has a separate NIC with a cable connected to server 2 (Has IP 10.10.10.5)
Server 2 uses second same nic with the second port connected to server one (Has IP 10.10.10.15)
So basically there is an ethernet cable connected directly from server 1 to server 2
I can ping 10.10.10.5 (server1) from 10.10.10.15 (server2) the problem is that I want to give a VM on server connection using that cable so for instance the VM would have IP (10.10.10.20) I did try to make Bridges on each server and it worked and I could ping the bridges and nic IPs from each server but once I create a VM and give it the bridge as a network then go into the VM (in this case Prxmox backup) and edit the network setting to only have IP and not gateway I can not ping our from the VM at all.
Is there a good way I can do this and I want my backups to run over that directly connected cable as the cluster already communicates on that fine.
