All,
Just trying to use Proxmox for my home server and found difficulties in enabling the Arrow Lake iGPU hence asking help from community.
I am using Intel Core Ultra 235 with iGPU and found that /dev/dri/card1 and /dev/dri/renderD128 are found in the system, however when I running vainfo, seem the driver is not loaded properly.
iGPU is found as below:
I need to have iGPU enabled for Jellyfin and Frigate LXC.
Appreciate all help from community
Just trying to use Proxmox for my home server and found difficulties in enabling the Arrow Lake iGPU hence asking help from community.
I am using Intel Core Ultra 235 with iGPU and found that /dev/dri/card1 and /dev/dri/renderD128 are found in the system, however when I running vainfo, seem the driver is not loaded properly.
Code:
root@pve:~# ls /dev/dri/
by-path card1 renderD128
root@pve:~# vainfo
error: can't connect to X server!
libva info: VA-API version 1.17.0
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so
libva info: va_openDriver() returns -1
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit
root@pve:~#iGPU is found as below:
Code:
root@pve:~# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Arrow Lake-S [Intel Graphics] (rev 06)
80:14.5 Non-VGA unclassified device: Intel Corporation Device 7f2f (rev 10)
root@pve:~# lspci -vv -nn -s 00:02
00:02.0 VGA compatible controller [0300]: Intel Corporation Arrow Lake-S [Intel Graphics] [8086:7d67] (rev 06) (prog-if 00 [VGA controller])
DeviceName: Onboard - Video
Subsystem: Micro-Star International Co., Ltd. [MSI] Arrow Lake-S [Intel Graphics] [1462:7e33]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 181
IOMMU group: 0
Region 0: Memory at b017000000 (64-bit, prefetchable) [size=16M]
Region 2: Memory at a000000000 (64-bit, prefetchable) [size=256M]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+ FLReset+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp+ 10BitTagReq+ OBFF Not Supported, ExtFmt+ EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
AtomicOpsCtl: ReqEn-
Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable+ 64bit+
Address: 00000000fee00018 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Null
Capabilities: [110 v1] Process Address Space ID (PASID)
PASIDCap: Exec- Priv-, Max PASID Width: 14
PASIDCtl: Enable- Exec- Priv-
Capabilities: [200 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable+, Smallest Translation Unit: 00
Capabilities: [420 v1] Physical Resizable BAR
BAR 2: current size: 256MB, supported: 256MB
Capabilities: [320 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration- 10BitTagReq+ Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy- 10BitTagReq-
IOVSta: Migration-
Initial VFs: 7, Total VFs: 7, Number of VFs: 0, Function Dependency Link: 00
VF offset: 1, stride: 1, Device ID: 7d67
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at 000000b010000000 (64-bit, prefetchable)
VF Migration: offset: 00000000, BIR: 0
Capabilities: [400 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
Kernel driver in use: i915
Kernel modules: i915, xe
root@pve:~#I need to have iGPU enabled for Jellyfin and Frigate LXC.
Appreciate all help from community