Installed 4.4 Proxmox but not able to move forward

[persevere]

Hi promox friends,
I have been using proxmox for past 3 years. I installed 4.4 [not upgraded] two days ago. Everything works fine as long as i was connected to the server using my laptop[either wifi or network cable]. But i am not able to see the prompt [monitor attached to the proxmox server] as it got struck i guess. Attached the screen shot. Can anyone of you please let me know the solution.


Thanks
Perseverance.

 

[e100]

Did you try pressing enter and see if the prompt comes back?

Proxmox uses Ubuntu kernel, looks like adding "iommu=soft" to the kernel params will prevent those messages.

http://askubuntu.com/questions/8050...oting-16-04-amd-vi-event-logged-io-page-fault

 

[persevere]

@e100
Thanks for your reply. It worked in removing all the errors messages. But it's still hanging [on the monitor which is connected to server]
Here are the errors messages.

loading, please wait ...
/dev/mapper/pve-root: clean, 51619/6291456 files, 743469/25165824 blocks
[ 21.479902] systemd-sysv-generator[307]: Ignoring creation of an alias umountiscsi.service for itself
[ 23.062820] Error: Driver 'pcspkr' is already registered, aborting


After this it's not going forward and just hanging
If i connect from my laptop using ethernet cable I am able to connect and it is working.

 

[fabian]

@e100
Thanks for your reply. It worked in removing all the errors messages. But it's still hanging [on the monitor which is connected to server]
Here are the errors messages.

loading, please wait ...
/dev/mapper/pve-root: clean, 51619/6291456 files, 743469/25165824 blocks
[ 21.479902] systemd-sysv-generator[307]: Ignoring creation of an alias umountiscsi.service for itself
[ 23.062820] Error: Driver 'pcspkr' is already registered, aborting


After this it's not going forward and just hanging
If i connect from my laptop using ethernet cable I am able to connect and it is working.

those are not error messages (well, they are a warning and an error message, but they can be safely ignored).

try adapting the boot command line to get more output, e.g. by removing "quiet" or adding one of the systemd debugging options. you can do this by pressing "e" in the grub menu, and editing the line starting with "linux". maybe it's hanging on bringing up the network interfaces? not sure what you mean by "If i connect from my laptop using ethernet cable I am able to connect and it is working."