Installation Fails On 2 Hard Disks

[ibm2100]

I tried to install Proxmox VE 1.5 on a Core 2 quad computer with 2 hard disks but it failed 3 times. When I looked at the file systems of those 2 hard drives, it shows LVM2 with the first HD showing as bootable. But when I reboot, nothing shows up...

If the installer detected that there are 2 or more hard disks on a computer, the installer should automatically create one volume group and include all those hard disks under that group. Given proper programming, when it reboots, the installation would proceed as normal.

 

[dietmar]

I tried to install Proxmox VE 1.5 on a Core 2 quad computer with 2 hard disks but it failed 3 times.

Why does it fail? maybe you just need to modify the bios boot order?

If the installer detected that there are 2 or more hard disks on a computer, the installer should automatically create one volume group and include all those hard disks under that group.

I don't think that is a good idea.

 

[ibm2100]

I did modify the bios boot order to the supposedly correct one (the harddisk which says bootable), it just fails...

But when I installed it to only one hard disk, it's ok.