installation error

[Antonio7319]

Hi hello everyone I'm new to the forum and to proxmox, I have a huawei 2288hv3 server on which I installed proxmox 7.3 the installation seems to have gone well but when I restart it gives me an error (firmware bug) then comes the screen with the ip a to connect to, I tried but nothing the network card works because I can connect to ibmc.
I attach 2 photos of the error.

Ciao un saluto a tutti sono nuovo del forum e di proxmox, ho un server huawei 2288hv3 su cui ho installato proxmox 7.3 l'installazione sembra andata bene ma al riavvio mi da un errore (firmware bug) poi arriva la schermata con l'ip a cui connettersi, ho provato ma nulla la scheda di rete funziona perche riesco a connettermi a ibmc.
allego 2 foto dell errore.

 

[leesteken]

Looks like the installation went fine. What is the IP address of the other computer that you use to connect to https://192.168.1.2:8006/ ? It is in the same local subnet? Does your router agree that Proxmox is on 192.168.1.2?
Can you login to the console with root and the password? What are the outputs of the commands ip r and ip a?

 

[Antonio7319]

the ip address of the other pc 192.168.1.8
the proxmox ip does not appear from the router

l'indirizzo ip dell'altro pc 192.168.1.8
dal router non mi compare l'ip di proxmox

 

[Antonio7319]

I tried from shell but it doesn't connect

ho provato da shell ma non si collega

 

[leesteken]

Please login to the console and show the outputs of the commands ip r and ip a?
If you cannot login to the console (using a physical keyboard and the display in your photo's), please explain in more detail what is preventing you from doing so.

 

[Antonio7319]

from the console I can log in, I don't understand the output of the ip r and ip a commands?

dalla console riesco ad accedere, non capisco gli output dei comandi ip r e ip a?[ATTACH type="full"]45965[/ATTACH]

 

[leesteken]

from the console I can log in, I don't understand the output of the ip r and ip a commands?

Please type ip r (type lowercase i, lowercase p, space, lowercase r) and press the Enter (or Return) key. This will display some new text on the screen. Please take a photo and show us. Do the same of ip a.

 

[Antonio7319]

fatto

 

[leesteken]

fatto

View attachment 45966

The link is down and no-carrier. Either the cable is not connected (properly) or broken or it plugged into the wrong network port (as your system appears to have two of them).
Or you can change the configuration to use the other port and see if that resolved the connection problem, but that requires more typing and running commands.

 

[Antonio7319]

it seems to me that it only has one network port now i'm going to check

mi sembra cha abbia solo una porta di rete ora vado a controllare

 

[leesteken]

it seems to me that it only has one network port now i'm going to check

mi sembra cha abbia solo una porta di rete ora vado a controllare

Show the output of cat /etc/network/interfaces and we can see which ports is configured in order to make sure if is a configuration issue and not a hardware issue.

 

[Antonio7319]

sorry I'm not that practical
how can I do?

I didn't see the command

 

[leesteken]

sorry I'm not that practical
how can I do?

I didn't see the command

cat /etc/network/interfaces
(like ip a but different)

 

[Antonio7319]

 

[leesteken]

enp2s0f0 is configured and it shows UP but also NO-CARRIER instead of LOWER_UP. Either the cable is bad, the network port on the other side is bad, or they cannot talk to each other for some reason. Try another cable or try another port on your router.
Did you find the second network port on your Proxmox computer?

 

[Antonio7319]

 

[Antonio7319]

there is only one port now try changing the cable but it works with ibmc

 

[leesteken]

there is only one port now try changing the cable but it works with ibmc

Maybe IBMC is interfering with 192.168.1.2? What is the IP address of IBMC?

 

[Antonio7319]

192.68.1.90

 

[Antonio7319]

changed the cable but nothing