Install Proxmox in Bmax Minipc B6 plus Intel I3 (Fail)

M

MikelV

New Member
Feb 15, 2024
5
0
1
Hi all,
I try to install Proxmox with usb booteable, the last version and before. Minipc always frozen. I try to chagen some elements in the bios, but always is the same.
The error is different if I modify the BIOS.
First error
1708019713744.png

Second
1708019770880.png

Hypertherading and virtualization is ON.
Any Idea or anyone install proxmox in B6 Plus.
Thanks in advance.
 
Hi,

sounds like a hardware or maybe firmware issue.
Have you tried updating the UEFI? Maybe this fixes it, consumer and esp. these Mini PCs get shipped with very shoddy firmware in most cases.

Otherwise, you can try booting stock Debian 12 and see if the issue persists there. If yes, than I'd advise you to contact the vendor about these hardware issues.
 
cheiss said:
Hi,

sounds like a hardware or maybe firmware issue.
Have you tried updating the UEFI? Maybe this fixes it, consumer and esp. these Mini PCs get shipped with very shoddy firmware in most cases.

Otherwise, you can try booting stock Debian 12 and see if the issue persists there. If yes, than I'd advise you to contact the vendor about these hardware issues.
Click to expand...
Hi thanks for your words.
I check it Bios system, allow uefy system, disable secure boot and another options bios. But always the same error. I try to install some distrito before but always fail. Disable Bluetooth, wifi, etc.
results always frozen minipc and black screen.
I’ll try to install Debian. And contact with vendor if not works.
Thanks for your help
 
I’ve installed Debian 12, install ok, but when I reboot appears the first screen and system is frozen.
It’s equal with proxmox.
 
Check the device that is causing the pci bus error 8086:38bc... Rxerr probably network card...
Looks like hardware fault!
 
You must log in or register to reply here.
Top Bottom