Well I install it using a how-to video, so not sure what is wrong ...
Anyway to to a reinstall keeping my actual VMs ?
[SOLVED] Install NVIDIA Drivers
- Thread starter TheDarthFather
- Start date
Anyway to to a reinstall keeping my actual VMs ?
You can always try to salvage this install before reinstalling. Fix all the repos and run the usual apt update / apt upgrade.
I am afaid I am not sure what Fix all the repos means
Completely replace the contents of /etc/apt/sources.list with the following:
deb http://ftp.us.debian.org/debian bullseye main contrib non-free
deb http://ftp.us.debian.org/debian bullseye-updates main contrib non-free
deb http://security.debian.org bullseye-security main contrib non-free
deb http://ftp.us.debian.org/debian bullseye-backports main contrib non-free
deb http://download.proxmox.com/debian/pve bullseye pve-no-subscription
After you have corrected /etc/apt/sources.list, run the following command:
apt-get -q update && apt-get -y -q dist-upgrade && apt-get -q -y autoremove --purge && apt-get -y -q clean
Then reboot. After reboot, run the above command again. Then please provide a list of all packages. From the GUI, go to the node, Summary, and click Package Versions. You can copy and paste it here.
Code:
proxmox-ve: 7.0-2 (running kernel: 5.11.22-7-pve)
pve-manager: 7.0-14+1 (running version: 7.0-14+1/08975a4c)
pve-kernel-helper: 7.1-4
pve-kernel-5.11: 7.0-10
pve-kernel-5.11.22-7-pve: 5.11.22-12
pve-kernel-5.11.22-5-pve: 5.11.22-10
pve-kernel-5.11.22-1-pve: 5.11.22-2
ceph: 16.2.6-pve2
ceph-fuse: 16.2.6-pve2
corosync: 3.1.5-pve2
criu: 3.15-1+pve-1
glusterfs-client: 9.2-1
ifupdown2: 3.1.0-1+pmx3
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-1
libknet1: 1.22-pve2
libproxmox-acme-perl: 1.4.0
libproxmox-backup-qemu0: 1.2.0-1
libpve-access-control: 7.0-6
libpve-apiclient-perl: 3.2-1
libpve-common-perl: 7.0-12
libpve-guest-common-perl: 4.0-2
libpve-http-server-perl: 4.0-3
libpve-storage-perl: 7.0-13
libspice-server1: 0.14.3-2.1
lvm2: 2.03.11-2.1
lxc-pve: 4.0.9-4
lxcfs: 4.0.8-pve2
novnc-pve: 1.2.0-3
proxmox-backup-client: 2.0.13-1
proxmox-backup-file-restore: 2.0.13-1
proxmox-mini-journalreader: 1.2-1
proxmox-widget-toolkit: 3.3-6
pve-cluster: 7.0-3
pve-container: 4.1-1
pve-docs: 7.0-5
pve-edk2-firmware: 3.20210831-1
pve-firewall: 4.2-5
pve-firmware: 3.3-3
pve-ha-manager: 3.3-1
pve-i18n: 2.5-1
pve-qemu-kvm: 6.1.0-1
pve-xtermjs: 4.12.0-1
qemu-server: 7.0-18
smartmontools: 7.2-pve2
spiceterm: 3.2-2
vncterm: 1.7-1
zfsutils-linux: 2.1.1-pve3same as before
Code:
root@hypervisor:~# apt install gcc-8-base
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package gcc-8-baseWhat files are listed in the directory /etc/apt/sources.list.dsame as before
Code:root@hypervisor:~# apt install gcc-8-base Reading package lists... Done Building dependency tree... Done Reading state information... Done E: Unable to locate package gcc-8-base
List the contents of each file please.
There is only ceph.list file and inside
deb http://download.proxmox.com/debian/ceph-pacific bullseye mainPS: I installed ceph out of curiosity ...
Well ... I did run the nvidia installer one more time ... and amazingly it did not raise the gcc error.
So it seems it worked with a 'small' disclaimer:
Thanks a lot for your help and patience
PS: I will try tommorow the install in container .. 1:30 - AM now
In case anyone needs a similar solution, this is what worked as part of Jason's recomandations:
it seems I had to do an apt update as well before it worked, but I am not 100% sure if this made the difference ...
Code:
1. Replace the contents of /etc/apt/sources.list with the following:
deb http://ftp.us.debian.org/debian bullseye main contrib non-free
deb http://ftp.us.debian.org/debian bullseye-updates main contrib non-free
deb http://security.debian.org bullseye-security main contrib non-free
deb http://ftp.us.debian.org/debian bullseye-backports main contrib non-free
deb http://download.proxmox.com/debian/pve bullseye pve-no-subscription
2 Run the following command:
apt-get -q update && apt-get -y -q dist-upgrade && apt-get -q -y autoremove --purge && apt-get -y -q clean
3. Restart and run the command againit seems I had to do an apt update as well before it worked, but I am not 100% sure if this made the difference ...
Last edited: