install in virtual box

S

sami1231

New Member
Sep 25, 2020
6
0
1
28
after I installed I can't connect to the WEB-GUI
Screen Shot 2020-09-26 at 13.06.59.pngScreen Shot 2020-09-26 at 13.08.04.png
 

Attachments

  • Screen Shot 2020-09-26 at 13.06.59.png
    Screen Shot 2020-09-26 at 13.06.59.png
    25.3 KB · Views: 3
vikozo said:
whats the ip address of you Computer, the ip of the Gateway of your Computer and the gateway of your VM?
Click to expand...
Code: 
ifconfig | grep inet
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    inet6 fe80::1074:113b:da97:35ad%en1 prefixlen 64 secured scopeid 0x7
    inet 192.168.0.103 netmask 0xffffff00 broadcast 192.168.0.255
    inet6 fe80::ab67:32bf:51ce:6ebf%utun0 prefixlen 64 scopeid 0xc
 
Code: 
 ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
EHC250: flags=0<> mtu 0
EHC253: flags=0<> mtu 0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
    ether 3c:07:54:56:14:ad
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect (none)
    status: inactive
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 68:a8:6d:2a:16:2a
    inet6 fe80::14b3:395c:dd7b:41ec%en1 prefixlen 64 secured scopeid 0x7
    inet 192.168.0.103 netmask 0xffffff00 broadcast 192.168.0.255
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect
    status: active
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    ether 0a:a8:6d:2a:16:2a
    media: autoselect
    status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether d2:00:1c:4b:c1:80
    media: autoselect <full-duplex>
    status: inactive
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
    lladdr a4:b1:97:ff:fe:c4:bc:18
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect <full-duplex>
    status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=63<RXCSUM,TXCSUM,TSO4,TSO6>
    ether d2:00:1c:4b:c1:80
    Configuration:
        id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
        maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
        root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
        ipfilter disabled flags 0x2
    member: en2 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 9 priority 0 path cost 0
    nd6 options=201<PERFORMNUD,DAD>
    media: <unknown type>
    status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
    inet6 fe80::a92e:fee9:6453:2d09%utun0 prefixlen 64 scopeid 0xc
    nd6 options=201<PERFORMNUD,DAD>

this?
 
Change the virtualbox vm network to bridged not nat, and then reinstall pve or change network inside vm manually.

This way you will get a lan ip which you can connect to.
 
You must log in or register to reply here.
Top Bottom