install in virtual box

sami1231

New Member
Sep 25, 2020
6
0
1
26
after I installed I can't connect to the WEB-GUI
Screen Shot 2020-09-26 at 13.06.59.pngScreen Shot 2020-09-26 at 13.08.04.png
 

Attachments

  • Screen Shot 2020-09-26 at 13.06.59.png
    Screen Shot 2020-09-26 at 13.06.59.png
    25.3 KB · Views: 2
whats the ip address of you Computer, the ip of the Gateway of your Computer and the gateway of your VM?
Code:
ifconfig | grep inet
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    inet6 fe80::1074:113b:da97:35ad%en1 prefixlen 64 secured scopeid 0x7
    inet 192.168.0.103 netmask 0xffffff00 broadcast 192.168.0.255
    inet6 fe80::ab67:32bf:51ce:6ebf%utun0 prefixlen 64 scopeid 0xc
 
Code:
 ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
EHC250: flags=0<> mtu 0
EHC253: flags=0<> mtu 0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
    ether 3c:07:54:56:14:ad
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect (none)
    status: inactive
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 68:a8:6d:2a:16:2a
    inet6 fe80::14b3:395c:dd7b:41ec%en1 prefixlen 64 secured scopeid 0x7
    inet 192.168.0.103 netmask 0xffffff00 broadcast 192.168.0.255
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect
    status: active
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    ether 0a:a8:6d:2a:16:2a
    media: autoselect
    status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether d2:00:1c:4b:c1:80
    media: autoselect <full-duplex>
    status: inactive
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
    lladdr a4:b1:97:ff:fe:c4:bc:18
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect <full-duplex>
    status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=63<RXCSUM,TXCSUM,TSO4,TSO6>
    ether d2:00:1c:4b:c1:80
    Configuration:
        id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
        maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
        root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
        ipfilter disabled flags 0x2
    member: en2 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 9 priority 0 path cost 0
    nd6 options=201<PERFORMNUD,DAD>
    media: <unknown type>
    status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
    inet6 fe80::a92e:fee9:6453:2d09%utun0 prefixlen 64 scopeid 0xc
    nd6 options=201<PERFORMNUD,DAD>

this?
 
Change the virtualbox vm network to bridged not nat, and then reinstall pve or change network inside vm manually.

This way you will get a lan ip which you can connect to.
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!