Install fail on HP ProLiant DL380 Gen9

[nivmizz7]

Hi everyone, I try to installed Proxmox VE on my HP Proliant DL380 Gen9, but when I install (with graphical), when its create LVs its crash; linux panic, and its reboot. I boot with and USB key, with directly the ISO in them with Rufus (not Ventoy). I remove the 8 SAS 300GB before the install to configure it in RAID6 after the install with PVE. And I have 128GB of DDR4. (I try to install PVE in the intern SD card of 128GB, not on a SAS/HDD/SSD)

Anyone know why it do this? Secure Boot issue (I desactivated it), but I must think its a RAM/CPU/Boot problem in the BIOS, but isk wich one/how to resolve it.. I had VMware ESXi before.

btw, sorry for my poor english, I am french,
Best regards,
Niv.

 

[leesteken]

A NMI usually indicates a hardware error (or old motherboard BIOS). Did your HP Proliant DL380 Gen9 work fine before with (Ubuntu) Linux? Maybe check for a BIOS update and test the hardware, like memtest.

EDIT: Anything in the IPMI around the time of the error?

 

[nivmizz7]

ok, I will try that. Thanks for the fast reply, I let you know if its resolve

 

[nivmizz7]

A NMI usually indicates a hardware error (or old motherboard BIOS). Did your HP Proliant DL380 Gen9 work fine before with (Ubuntu) Linux? Maybe check for a BIOS update and test the hardware, like memtest.

EDIT: Anything in the IPMI around the time of the error?

I know I have a problem with a battery, but I change it it persist.
But I dont check time or if there is other error, I will check the iLO if I get any other informations.

edit: I think the RAM is okay, but, for me, it can be 2 problem; the first is the issue with the battery; the second is an issue with old BIOS..

 

[nivmizz7]

Update: I check the iLO interface and its say I have an BIOS/HARDWARE problem..

And there is log from the server directly.

 

[adamb]

Update: I check the iLO interface and its say I have an BIOS/HARDWARE problem..

And there is log from the server directly.
View attachment 96894

We have tons of DL 380 Gen9's running proxmox with no issues

Proxmox will kill your SD card really fast, I wouldn't install it there. Proxmox will eat consumer grade M.2 SSD's for breakfast.

Using non HP memory will cause those errors in the BIOS/iLO. However it doesn't really effect anything and isn't the cause to your issues.

 

[nivmizz7]

I just install it in a RAID1 2x300GB SAS, and install done..
Thanks for the help!
but I have another problem, I have the impression that the weaner has a "ventilation cycle," it makes a lot of noise for 5 seconds every 10 seconds, whereas before it didn't do that, it was quite quiet...