I clicked on the option to use Erase Disk, and then my disk was gone

[KDCJT]

I wanted to add the other two disks to the PVE system, but I didn't know how, and in the middle of my fumbling, I chose the option to erase the disks, and then it prompted me with the following sentence

error wiping '/dev/sdb': 209715200 bytes (210 MB, 200 MiB) copied, 0.394994 s, 531 MB/s

What's going on? I'm missing my disk！

I tried to use the Erase Disk option with another disk that doesn't support GPT, and it prompted me as well

error wiping '/dev/sda': 0 bytes copied, 0.00120444 s, 0.0 kB/s

 

[KDCJT]

And when I try to add a disk that doesn't support GPT to the LVM option, it prompts me

command '/usr/bin/file -L -s /dev/sda' failed: exit code 1

Task viewer: LVM 存储 local/500G - 创建

输出状态

停止

下载
Error reading device /dev/sda at 0 length 512.
Error reading device /dev/sda at 0 length 4096.
Error reading device /dev/sdb at 0 length 512.
Error reading device /dev/sdb at 0 length 4096.
Error reading device /dev/sdb1 at 0 length 4096.
Error reading device /dev/sdb2 at 0 length 4096.
Error reading device /dev/sdb3 at 0 length 4096.
Error reading device /dev/sdb4 at 0 length 4096.
TASK ERROR: command '/usr/bin/file -L -s /dev/sda' failed: exit code 1

This is the log file

 

[fabian]

what kind of disks are they?

 

[KDCJT]

what kind of disks are they?

I found the problem! One of the SATA disks has bad blocks, and after being recognized by the computer, it will get stuck on the computer and cannot be formatted, which is why there is a problem, and the other mechanical hard disk is actually good