I can't reach the Proxmox 7.3 web interface

pilgrimage

Member
Oct 17, 2021
58
2
13
43
I can't reach the Proxmox 7.3 web interface. I entered ip during installation. Then it seems to get ip but I can't reach it on the same network. My server has two ethernet cards as en01 enps1. My network cable is plugged into the en01 port, but when I check with ip a, it shows that proxmox has ip on vmbr0. I wonder if I can't access the web interface because of this? Actually these should be in bridge mode. I need support on this issue. Thanks for your help.
 
My network cable is plugged into the en01 port, but when I check with ip a, it shows that proxmox has ip on vmbr0. I wonder if I can't access the web interface because of this?
This is normal. Proxmox itself has an IP address on the bridge. Think of it as expanding the single connection to a virtual bridge/hub/switch to which all the VM (as well as the Proxmox host) can connect.
What is the output of cat /etc/network/interfaces, ip r and ip a, when you run those commands on the Proxmox host console (using a physical display and keyboard)? Does SSH to the Proxmox host work?
 
Last edited:
Also make sure you don't forget the port (the ":8006" at the end of the URL) and don't forget to use https and not http (URL has to start with "https://").
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!