HP StoreEver MSL6480 - PBS 3.0.3

flowbergit

Renowned Member
Jun 3, 2015
42
0
71
Hi,

I have a problem with LTO-6 HP StoreEver MSL6480 -- Device is connected by FC and I can use manually drive, but Changer is doesn't recognized

Code:
root@pbs:~/ltfs# lsscsi
[10:0:0:0]   disk    3PARdata VV               3226  /dev/sda
[10:0:0:1]   disk    3PARdata VV               3226  /dev/sdb
[10:0:0:254] enclosu 3PARdata SES              3226  -       
[10:0:1:0]   disk    3PARdata VV               3226  /dev/sdc
[10:0:1:1]   disk    3PARdata VV               3226  /dev/sdd
[10:0:1:254] enclosu 3PARdata SES              3226  -       
[10:0:2:0]   disk    3PARdata VV               3226  /dev/sde
[10:0:2:1]   disk    3PARdata VV               3226  /dev/sdf
[10:0:2:254] enclosu 3PARdata SES              3226  -       
[10:0:3:0]   disk    3PARdata VV               3226  /dev/sdg
[10:0:3:1]   disk    3PARdata VV               3226  /dev/sdh
[10:0:3:254] enclosu 3PARdata SES              3226  -       
[10:0:4:0]   tape    HP       Ultrium 6-SCSI   252W  /dev/st1
[11:0:0:0]   tape    HP       Ultrium 6-SCSI   252W  /dev/st0
[11:0:1:0]   disk    3PARdata VV               3226  /dev/sdi
[11:0:1:1]   disk    3PARdata VV               3226  /dev/sdj
[11:0:1:254] enclosu 3PARdata SES              3226  -       
[11:0:2:0]   disk    3PARdata VV               3226  /dev/sdk
[11:0:2:1]   disk    3PARdata VV               3226  /dev/sdl
[11:0:2:254] enclosu 3PARdata SES              3226  -       
[11:0:3:0]   disk    3PARdata VV               3226  /dev/sdm
[11:0:3:1]   disk    3PARdata VV               3226  /dev/sdn
[11:0:3:254] enclosu 3PARdata SES              3226  -       
[11:0:4:0]   disk    3PARdata VV               3226  /dev/sdo
[11:0:4:1]   disk    3PARdata VV               3226  /dev/sdp
[11:0:4:254] enclosu 3PARdata SES              3226  -       

root@pbs:~/ltfs# ls /dev/tape/by-path/
pci-0000:08:00.0-fc-0x5001438026dcc75f-lun-0      pci-0000:08:00.1-fc-0x5001438026dcc7b8-lun-0
pci-0000:08:00.0-fc-0x5001438026dcc75f-lun-0-nst  pci-0000:08:00.1-fc-0x5001438026dcc7b8-lun-0-nst
root@pbs:~/ltfs# ls /dev/tape/by-id/
scsi-35001438026dcc75d      scsi-35001438026dcc75d-sg  scsi-35001438026dcc7b7-nst  scsi-8026DCC75D      scsi-8026DCC75D-sg  scsi-8026DCC7B7-nst
scsi-35001438026dcc75d-nst  scsi-35001438026dcc7b7     scsi-35001438026dcc7b7-sg   scsi-8026DCC75D-nst  scsi-8026DCC7B7     scsi-8026DCC7B7-sg
root@pbs:~/ltfs#
 
can you pos the output of

Code:
proxmox-tape changer scan
dmesg
?
 
ok so it does not detect the library even on the kernel level, so i'd check the library settings if you have to enable e.g. access first.
when not even the kernel sees the device, there is little we can do from our side and it's most likely a configuration/hw issue on the hba/tape lib side