Hi All
I recently installed proxmox on the internal usb disk. Proxmox boots very well. From the command line I can see the five disks connected to the unit. Able to connect via gdisk. Do mkfs.ext4 on the disks. In the four bays, I have 3tb seagate disks. In the cdrom unit I have a 500gb 2.5" hard disk.
My issue is on the Proxmox web interface when I go to disks, it sits forever looking for something with the spinning wheel. I can see the usb disk under lvm-thin.
I have setup under the bios ahci. Disks are seen by the bios during the boot process.
Do I need anything added in the grub configuration. Do I need to change anything in bios.
How can I get them found in the web ui so I can add the disks thank you.
Joseph
I recently installed proxmox on the internal usb disk. Proxmox boots very well. From the command line I can see the five disks connected to the unit. Able to connect via gdisk. Do mkfs.ext4 on the disks. In the four bays, I have 3tb seagate disks. In the cdrom unit I have a 500gb 2.5" hard disk.
My issue is on the Proxmox web interface when I go to disks, it sits forever looking for something with the spinning wheel. I can see the usb disk under lvm-thin.
I have setup under the bios ahci. Disks are seen by the bios during the boot process.
Do I need anything added in the grub configuration. Do I need to change anything in bios.
How can I get them found in the web ui so I can add the disks thank you.
Joseph
Last edited: