How to use motherboard VGA in VM

[rice818]

i'm a newbie to Proxmox, sorry if this is a dump question

My Proxmox server is installed in a Tiny PC, i5 6Gen CPU, VGA onboard is intel chipset 530, obviously no room to install PCI VGA card,

My goal is install a Win10 VM that can run Roblox in it, but I found the General VGA is very laggy

how to pass through the onboard VGA to this VM (Win10) ????

 

[Lukas Wagner]

Hello, what you are looking for is PCIe passthrough [1]. Check if your CPU and mainboard supports 'Intel VT-d', otherwise this won't work.


[1] https://pve.proxmox.com/wiki/PCI(e)_Passthrough

 

[rice818]

Hello, what you are looking for is PCIe passthrough [1]. Check if your CPU and mainboard supports 'Intel VT-d', otherwise this won't work.


[1] https://pve.proxmox.com/wiki/PCI(e)_Passthrough

i think my motherboard support this .... Intel VT-d, as I was successfully installed Proxmox and created Win10 VM

 

[Lukas Wagner]

i think my motherboard support this .... Intel VT-d, as I was successfully installed Proxmox and created Win10 VM

Careful, don't mix it up with VT-x, which is the feature that enables hardware-accelerated VMs in general

 

[rice818]

what i have is just this in BIOS, already enable intel VT

 

[Lukas Wagner]

If it is just called "Intel VT" I think VT-x is meant, so I think your board does not support VT-d. So PCIe passthrough will not be possible, I'm afraid.

 

[rice818]

If it is just called "Intel VT" I think VT-x is meant, so I think your board does not support VT-d. So PCIe passthrough will not be possible, I'm afraid.

opps...... my goal vanish

anyway thanks