situation
my sda hardisk was spoil
then i have replace new hardisk.
new hardisk detail
smartctl -a /dev/sda
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.16-3-pve] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10EZEX-00BBHA0
Serial Number: WD-WCC6YHRTMR6D
LU WWN Device Id: 5 0014ee 26bed8cf2
Firmware Version: 01.01A01
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Feb 28 14:26:08 2025 +08
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
May I know how to i sync back from sdb to sda new hardisk?
my sda hardisk was spoil
then i have replace new hardisk.
new hardisk detail
smartctl -a /dev/sda
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.16-3-pve] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10EZEX-00BBHA0
Serial Number: WD-WCC6YHRTMR6D
LU WWN Device Id: 5 0014ee 26bed8cf2
Firmware Version: 01.01A01
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Feb 28 14:26:08 2025 +08
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
May I know how to i sync back from sdb to sda new hardisk?
