How to prevent remote access to SSH 22 port, firewall rules

vgstech

vgstech

Renowned Member
Proxmox Subscriber
Apr 24, 2015
5
1
68
vgst.net
HI,


I have a cluster with to machines on Proxmox 5.3-11 environment.

I know that port 22 it's needed to internal cluster communication, but I want to prevent remote access to this port. I added a second SSH port to allow remote login and works well. I have configured the firewall on cluster and nodes to deny SSH traffic from external networks, but still it's possible to access to SSH through 22 port, so, what I doing wrong?

This is the iptables config of one of the nodes:

Code: 
-P INPUT ACCEPT
-P FORWARD ACCEPT
-P OUTPUT ACCEPT
-N GROUP-cluster-IN
-N GROUP-cluster-OUT
-N PVEFW-Drop
-N PVEFW-DropBroadcast
-N PVEFW-FORWARD
-N PVEFW-FWBR-IN
-N PVEFW-FWBR-OUT
-N PVEFW-HOST-IN
-N PVEFW-HOST-OUT
-N PVEFW-INPUT
-N PVEFW-OUTPUT
-N PVEFW-Reject
-N PVEFW-SET-ACCEPT-MARK
-N PVEFW-logflags
-N PVEFW-reject
-N PVEFW-smurflog
-N PVEFW-smurfs
-N PVEFW-tcpflags
-A INPUT -j PVEFW-INPUT
-A FORWARD -j PVEFW-FORWARD
-A OUTPUT -j PVEFW-OUTPUT
-A GROUP-cluster-IN -j MARK --set-xmark 0x0/0x80000000
-A GROUP-cluster-IN -m set --match-set PVEFW-0-internal-v4 src -m set --match-set PVEFW-0-internal-v4 dst -g PVEFW-SET-ACCEPT-MARK
-A GROUP-cluster-IN -m comment --comment "PVESIG:35IwDfkTGykp7kuIhQYrmlQK9RQ"
-A GROUP-cluster-OUT -j MARK --set-xmark 0x0/0x80000000
-A GROUP-cluster-OUT -m comment --comment "PVESIG:QiNxnYp/kkUW2PbnPksDo1aXztU"
-A PVEFW-Drop -p tcp -m tcp --dport 43 -j PVEFW-reject
-A PVEFW-Drop -j PVEFW-DropBroadcast
-A PVEFW-Drop -p icmp -m icmp --icmp-type 3/4 -j ACCEPT
-A PVEFW-Drop -p icmp -m icmp --icmp-type 11 -j ACCEPT
-A PVEFW-Drop -m conntrack --ctstate INVALID -j DROP
-A PVEFW-Drop -p udp -m multiport --dports 135,445 -j DROP
-A PVEFW-Drop -p udp -m udp --dport 137:139 -j DROP
-A PVEFW-Drop -p udp -m udp --sport 137 --dport 1024:65535 -j DROP
-A PVEFW-Drop -p tcp -m multiport --dports 135,139,445 -j DROP
-A PVEFW-Drop -p udp -m udp --dport 1900 -j DROP
-A PVEFW-Drop -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -j DROP
-A PVEFW-Drop -p udp -m udp --sport 53 -j DROP
-A PVEFW-Drop -m comment --comment "PVESIG:WDy2wbFe7jNYEyoO3QhUELZ4mIQ"
-A PVEFW-DropBroadcast -m addrtype --dst-type BROADCAST -j DROP
-A PVEFW-DropBroadcast -m addrtype --dst-type MULTICAST -j DROP
-A PVEFW-DropBroadcast -m addrtype --dst-type ANYCAST -j DROP
-A PVEFW-DropBroadcast -d 224.0.0.0/4 -j DROP
-A PVEFW-DropBroadcast -m comment --comment "PVESIG:NyjHNAtFbkH7WGLamPpdVnxHy4w"
-A PVEFW-FORWARD -m conntrack --ctstate INVALID -j DROP
-A PVEFW-FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A PVEFW-FORWARD -m physdev --physdev-in fwln+ --physdev-is-bridged -j PVEFW-FWBR-IN
-A PVEFW-FORWARD -m physdev --physdev-out fwln+ --physdev-is-bridged -j PVEFW-FWBR-OUT
-A PVEFW-FORWARD -m comment --comment "PVESIG:qnNexOcGa+y+jebd4dAUqFSp5nw"
-A PVEFW-FWBR-IN -m conntrack --ctstate INVALID,NEW -j PVEFW-smurfs
-A PVEFW-FWBR-IN -m comment --comment "PVESIG:Ijl7/xz0DD7LF91MlLCz0ybZBE0"
-A PVEFW-FWBR-OUT -m comment --comment "PVESIG:2jmj7l5rSw0yVb/vlWAYkK/YBwk"
-A PVEFW-HOST-IN -i lo -j ACCEPT
-A PVEFW-HOST-IN -m conntrack --ctstate INVALID -j DROP
-A PVEFW-HOST-IN -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A PVEFW-HOST-IN -m conntrack --ctstate INVALID,NEW -j PVEFW-smurfs
-A PVEFW-HOST-IN -p igmp -j RETURN
-A PVEFW-HOST-IN -m set --match-set PVEFW-0-internal-v4 src -m set --match-set PVEFW-0-internal-v4 dst -j RETURN
-A PVEFW-HOST-IN -p tcp -m tcp --dport 8006 -j RETURN
-A PVEFW-HOST-IN -p tcp -m tcp --dport 8090 -j RETURN
-A PVEFW-HOST-IN -m set --match-set PVEFW-0-no_internal-v4 src -j DROP
-A PVEFW-HOST-IN -j GROUP-cluster-IN
-A PVEFW-HOST-IN -m mark --mark 0x80000000/0x80000000 -j RETURN
-A PVEFW-HOST-IN -p tcp -m set --match-set PVEFW-0-management-v4 src -m tcp --dport 8006 -j RETURN
-A PVEFW-HOST-IN -p tcp -m set --match-set PVEFW-0-management-v4 src -m tcp --dport 5900:5999 -j RETURN
-A PVEFW-HOST-IN -p tcp -m set --match-set PVEFW-0-management-v4 src -m tcp --dport 3128 -j RETURN
-A PVEFW-HOST-IN -p tcp -m set --match-set PVEFW-0-management-v4 src -m tcp --dport 22 -j RETURN // < ---------- Problem??
-A PVEFW-HOST-IN -s X.X.X.0/24 -d X.X.X.0/24 -p udp -m udp --dport 5404:5405 -j RETURN
-A PVEFW-HOST-IN -s X.X.X.X/24 -p udp -m addrtype --dst-type MULTICAST -m udp --dport 5404:5405 -j RETURN
-A PVEFW-HOST-IN -j RETURN
-A PVEFW-HOST-IN -m comment --comment "PVESIG:bGq98TkuB/Z1+O7SsqGMkr4+KEg"
-A PVEFW-HOST-OUT -o lo -j ACCEPT
-A PVEFW-HOST-OUT -m conntrack --ctstate INVALID -j DROP
-A PVEFW-HOST-OUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A PVEFW-HOST-OUT -p igmp -j RETURN
-A PVEFW-HOST-OUT -j GROUP-cluster-OUT
-A PVEFW-HOST-OUT -m mark --mark 0x80000000/0x80000000 -j RETURN
-A PVEFW-HOST-OUT -d X.X.X.X/24 -p tcp -m tcp --dport 8006 -j RETURN
-A PVEFW-HOST-OUT -d X.X.X.X/24 -p tcp -m tcp --dport 22 -j RETURN
-A PVEFW-HOST-OUT -d X.X.X.X/24 -p tcp -m tcp --dport 5900:5999 -j RETURN
-A PVEFW-HOST-OUT -d X.X.X.X/24 -p tcp -m tcp --dport 3128 -j RETURN
-A PVEFW-HOST-OUT -d X.X.X.X/24 -p udp -m udp --dport 5404:5405 -j RETURN
-A PVEFW-HOST-OUT -p udp -m addrtype --dst-type MULTICAST -m udp --dport 5404:5405 -j RETURN
-A PVEFW-HOST-OUT -j RETURN
-A PVEFW-HOST-OUT -m comment --comment "PVESIG:83FUEKuA1BtYAGvdoEhalC1itoE"
-A PVEFW-INPUT -j PVEFW-HOST-IN
-A PVEFW-INPUT -m comment --comment "PVESIG:+5iMmLaxKXynOB/+5xibfx7WhFk"
-A PVEFW-OUTPUT -j PVEFW-HOST-OUT
-A PVEFW-OUTPUT -m comment --comment "PVESIG:LjHoZeSSiWAG3+2ZAyL/xuEehd0"
-A PVEFW-Reject -p tcp -m tcp --dport 43 -j PVEFW-reject
-A PVEFW-Reject -j PVEFW-DropBroadcast
-A PVEFW-Reject -p icmp -m icmp --icmp-type 3/4 -j ACCEPT
-A PVEFW-Reject -p icmp -m icmp --icmp-type 11 -j ACCEPT
-A PVEFW-Reject -m conntrack --ctstate INVALID -j DROP
-A PVEFW-Reject -p udp -m multiport --dports 135,445 -j PVEFW-reject
-A PVEFW-Reject -p udp -m udp --dport 137:139 -j PVEFW-reject
-A PVEFW-Reject -p udp -m udp --sport 137 --dport 1024:65535 -j PVEFW-reject
-A PVEFW-Reject -p tcp -m multiport --dports 135,139,445 -j PVEFW-reject
-A PVEFW-Reject -p udp -m udp --dport 1900 -j DROP
-A PVEFW-Reject -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -j DROP
-A PVEFW-Reject -p udp -m udp --sport 53 -j DROP
-A PVEFW-Reject -m comment --comment "PVESIG:CZJnIN6rAdpu+ej59QPr9+laMUo"
-A PVEFW-SET-ACCEPT-MARK -j MARK --set-xmark 0x80000000/0x80000000
-A PVEFW-SET-ACCEPT-MARK -m comment --comment "PVESIG:Hg/OIgIwJChBUcWU8Xnjhdd2jUY"
-A PVEFW-logflags -j DROP
-A PVEFW-logflags -m comment --comment "PVESIG:MN4PH1oPZeABMuWr64RrygPfW7A"
-A PVEFW-reject -m addrtype --dst-type BROADCAST -j DROP
-A PVEFW-reject -s 224.0.0.0/4 -j DROP
-A PVEFW-reject -p icmp -j DROP
-A PVEFW-reject -p tcp -j REJECT --reject-with tcp-reset
-A PVEFW-reject -p udp -j REJECT --reject-with icmp-port-unreachable
-A PVEFW-reject -p icmp -j REJECT --reject-with icmp-host-unreachable
-A PVEFW-reject -j REJECT --reject-with icmp-host-prohibited
-A PVEFW-reject -m comment --comment "PVESIG:Jlkrtle1mDdtxDeI9QaDSL++Npc"
-A PVEFW-smurflog -j DROP
-A PVEFW-smurflog -m comment --comment "PVESIG:2gfT1VMkfr0JL6OccRXTGXo+1qk"
-A PVEFW-smurfs -s 0.0.0.0/32 -j RETURN
-A PVEFW-smurfs -m addrtype --src-type BROADCAST -g PVEFW-smurflog
-A PVEFW-smurfs -s 224.0.0.0/4 -g PVEFW-smurflog
-A PVEFW-smurfs -m comment --comment "PVESIG:HssVe5QCBXd5mc9kC88749+7fag"
-A PVEFW-tcpflags -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG FIN,PSH,URG -g PVEFW-logflags
-A PVEFW-tcpflags -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -g PVEFW-logflags
-A PVEFW-tcpflags -p tcp -m tcp --tcp-flags SYN,RST SYN,RST -g PVEFW-logflags
-A PVEFW-tcpflags -p tcp -m tcp --tcp-flags FIN,SYN FIN,SYN -g PVEFW-logflags
-A PVEFW-tcpflags -p tcp -m tcp --sport 0 --tcp-flags FIN,SYN,RST,ACK SYN -g PVEFW-logflags
-A PVEFW-tcpflags -m comment --comment "PVESIG:CMFojwNPqllyqD67NeI5m+bP5mo"

I attached a screenshot of the GUI firewall config too.


Thanks
 

Attachments

  • firewall_rules.png
    firewall_rules.png
    19.6 KB · Views: 3
Hi,

how do you config the second port for ssh?
 
wolfgang said:
Hi,

how do you config the second port for ssh?
Click to expand...

With a second port, like that:


Code: 
#       $OpenBSD: sshd_config,v 1.100 2016/08/15 12:32:04 naddy Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options override the
# default value.

Port 22
Port XXXX

Both ports works correctly.
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom