[ Hint ] Just a tip to install Proxmox VE in Dell R620
- Thread starter Gilberto Ferreira
- Start date
Hello @Gilberto Ferreira,
I stumbled on your post because I recently got an R620 with H310 and am facing the issue of "No Hardisk Found" with the DMAR DRHD error. There are multiple posts I have found about R620s and H310 having issues but none I could find with actual solutions that I can follow.
You stated "After disable the RAID controller everything is ok!" I just want to ask what is the step by step process you followed to disable the RAID?
I have tried to go System Setup > System BIOS > SATA Settings > and played with the "Embedded SATA" setting (ATA Mode, AHCI Mode, RAID Mode, and Off) and none of those allow for the installation to recognize a harddisk.
I also have tried to go into Integrated Devices (under System Setup > System BIOS) and set "Integrated RAID Controller" to Disabled but that completely disables the Controller.
I have seen/read where people overwrite the firmware to allow IT Mode, but unless it is absolutely necessary for my setup to work, I rather try your method first.
Can you share the steps please?
I stumbled on your post because I recently got an R620 with H310 and am facing the issue of "No Hardisk Found" with the DMAR DRHD error. There are multiple posts I have found about R620s and H310 having issues but none I could find with actual solutions that I can follow.
You stated "After disable the RAID controller everything is ok!" I just want to ask what is the step by step process you followed to disable the RAID?
I have tried to go System Setup > System BIOS > SATA Settings > and played with the "Embedded SATA" setting (ATA Mode, AHCI Mode, RAID Mode, and Off) and none of those allow for the installation to recognize a harddisk.
I also have tried to go into Integrated Devices (under System Setup > System BIOS) and set "Integrated RAID Controller" to Disabled but that completely disables the Controller.
I have seen/read where people overwrite the firmware to allow IT Mode, but unless it is absolutely necessary for my setup to work, I rather try your method first.
Can you share the steps please?
You can follow the instruction in this web site:
https://fohdeesha.com/docs/index.html
Click in PERC Cross Flash and find you RAID controller.
To be honesty, I don't recall what I do at that time.
But I think the Fohdeesha guide will help you.
Keep us posted about your progress.
Cheers
Thanks. I was hoping not to do any third party flashing, but unfortunately, I could not find any other way.
Crossflash went smooth and now I have Proxmox running.
Crossflash went smooth and now I have Proxmox running.