Hetzner, PVE 7.0 problems after reboot. Maybe ifupdown2
- Thread starter Fischje
- Start date
The problem has been solved an the fix was released in ifupdown2 version 3.1.0-1+pmx3.
it's avaiable in no subscription repo
http://download.proxmox.com/debian/...n/binary-amd64/ifupdown2_3.1.0-1+pmx3_all.deb
not sure about enterprise repo
http://download.proxmox.com/debian/...n/binary-amd64/ifupdown2_3.1.0-1+pmx3_all.deb
not sure about enterprise repo
I tried the add pointopoint again and it worked for the main ip
I have a second IP in the Range (+1 higher than the Main ip)
This IP is bound to the MAC of a VM
As soon as I added pointopoint and changed the mask to /32 for the main ip in the bridge, the VM was not reachable anymore
I have a second IP in the Range (+1 higher than the Main ip)
This IP is bound to the MAC of a VM
As soon as I added pointopoint and changed the mask to /32 for the main ip in the bridge, the VM was not reachable anymore
please post your proxmox /etc/network/interfaces && your vm guest os ip configuration
here the current
the change I tried ... uncomment the point to point and changed /27 to /32
The VM is connected vmbr0 - it is opnsense firewall
With WAN port 144.76.91.(x+1)/27
Which words fine in this config above
Code:
auto lo
iface lo inet loopback
iface enp9s0 inet manual
auto vmbr0
iface vmbr0 inet static
address 144.76.91.x/27
gateway 144.76.91.161
# pointopoint 144.76.91.161
bridge-ports enp9s0
bridge-stp off
bridge-fd 1
bridge_hello 2
bridge_maxage 12
auto vmbr1
iface vmbr1 inet manual
bridge-ports none
bridge-stp off
bridge-fd 0the change I tried ... uncomment the point to point and changed /27 to /32
The VM is connected vmbr0 - it is opnsense firewall
With WAN port 144.76.91.(x+1)/27
Which words fine in this config above
so, are you sure that you need point to point ?
for me, pointtopoint setup are needed when gateway is outside your subnet. (some hosting provider require it),
and generally, you have a routed setup. (hypervisor have main ip pointopoint, with another(s) subnet(s), and vm are use hypervisor ip as gateway)
here you have a full /27 (bridged i think?), so it don't seem to be needed.
Last edited: