Help Needed with GPU Passthrough on MINIS FORUM Mini PC NAB6

[issa2020]

Hello Proxmox Community,

I'm seeking assistance with configuring GPU passthrough on my MINIS FORUM Mini PC NAB6 running Proxmox VE. Here are the hardware details:

• MINIS FORUM Mini PC NAB6
  • Processor: Intel Core i7-12650H up to 4.7 GHz
  • RAM: 32 GB DDR4
  • Storage: 1 TB PCIe 4.0 SSD
  • Networking: Dual LAN, WiFi 6, Bluetooth 5.2
  • Graphics: Intel UHD Graphics 770 / Alder Lake GT1
  • Ports: 2 x HDMI, 3 x USB Type-C, 4 x USB Type-A

I have successfully identified the GPU in my system using the following command:

root@pve:~# ./foundIOOMU.sh
IOMMU Group 0
00:02.0 VGA compatible controller: Intel Corporation Alder Lake-P GT1 [UHD Graphics] (rev 0c)

Additionally, I have confirmed that the IOMMU feature is enabled in the system:

root@pve:~# dmesg | grep -e DMAR -e IOMMU
[ 0.019201] ACPI: DMAR 0x0000000043626000 000088 (v02 INTEL EDK2 00000002 01000013)
[ 0.019256] ACPI: Reserving DMAR table memory at [mem 0x43626000-0x43626087]
[ 0.247986] DMAR: Host address width 39
[ 0.247987] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.247998] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[ 0.248001] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.248006] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
[ 0.248008] DMAR: RMRR base: 0x0000004c000000 end: 0x000000503fffff
[ 0.248012] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.248013] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.248015] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.249896] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.518130] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[ 0.609492] DMAR: No ATSR found
[ 0.609493] DMAR: No SATC found
[ 0.609494] DMAR: IOMMU feature fl1gp_support inconsistent
[ 0.609495] DMAR: IOMMU feature pgsel_inv inconsistent
[ 0.609496] DMAR: IOMMU feature nwfs inconsistent
[ 0.609497] DMAR: IOMMU feature dit inconsistent
[ 0.609498] DMAR: IOMMU feature sc_support inconsistent
[ 0.609499] DMAR: IOMMU feature dev_iotlb_support inconsistent
[ 0.609501] DMAR: dmar0: Using Queued invalidation
[ 0.609504] DMAR: dmar1: Using Queued invalidation
[ 0.612336] DMAR: Intel(R) Virtualization Technology for Directed I/O

However, despite these confirmations, I am encountering difficulties in passing through the GPU to a Windows 11 VM.






I would greatly appreciate any assistance or guidance on how to properly configure GPU passthrough for my setup.

Thank you in advance for your help!

 

[issa2020]

Hello so i try to add this :




On my virtual machine :





if u know how fix this problem please

 

[Coomer]

Have you tried enabling PCI-Express in Edit PCI Device advanced settings?



Try enabling that and then setting the Display to None.



Then you should get output on your attached display.

 

[issa2020]

Hello

still not working : i got error Code 43


this hardware on my VM :




if someone can help me how make my 3D graphics works on my VM please

thanks

 

[Coomer]

Try these drivers:

https://www.driverscloud.com/en/services/GetInformationDriver/75610-0/intel-gfx-win-1014146zip

It seems to work for the fellow below (different CPU, but drivers are compatible):

https://www.michaelstinkerings.org/gpu-virtualization-with-intel-12th-gen-igpu-uhd-730/

 

[issa2020]

Hello :

Try these drivers:

https://www.driverscloud.com/en/services/GetInformationDriver/75610-0/intel-gfx-win-1014146zip

It seems to work for the fellow below (different CPU, but drivers are compatible):

https://www.michaelstinkerings.org/gpu-virtualization-with-intel-12th-gen-igpu-uhd-730/

Hello when i try to install driver :



and the second how he is for proxmox 7, we arre no in the v8.2.2


this not working :'(

 

[BAV]

Do you need the use of primary PCI-E device GPU on your PC (HDMI output)? If not you can try vGPU approach which your PC and CPU support and have up to 7 vGPU to be assigned to different VMs. You can check this guide https://www.derekseaman.com/2024/07...u-vt-d-passthrough-with-intel-alder-lake.html

 

[jun3280]

Hi @issa2020, did you ever get full passthrough to work on your machine? I'm interested in possibly getting an NAB6 box as well, but I need confidence HDMI output from Windows 11 guest machine works.

On that note - did you see the following thread which seems to be successful :

https://forum.proxmox.com/threads/ms-01-i9-13900h-xe-igpu-full-passthrouh.146487/