(HELP) How to forward web UI Proxmox

[icalredhat]

I tired cant forward web ui proxmox, help me.
my ip public on router: 123.123.123.123
my proxmox: 10.10.10.10

nat on router:
dst.address=123.123.123.123
dst.port=8006
to.address=10.10.10.10
to.port=8006

status on router can hit, but on web browser is cant access.. help me to port forwarding web ui proxmox can access on internet.. thanks

 

[Richard]

my ip public on router: 123.123.123.123
my proxmox: 10.10.10.10

nat on router:
dst.address=123.123.123.123
dst.port=8006
to.address=10.10.10.10
to.port=8006

status on router can hit, but on web browser is cant access..

Should be possible - maybe a firewall blocks it somewhere? More details about your setup are necessary to clarify this issue.

Try also to check if packets dedicated for Web GUI arrive in Proxmox by

tcpdump -e -n -i vmbr0

at Proxmox's CLI

 

[SyPhEn]

I have the same issue, and my setup is quite simple. Dell 2950 running Proxmox 6.4.4, sharing a single private IPV4 address 10.0.0.45, connected to an HP Procurve 2810-48G directly to Comcast Xfinity with port forwarding to port 8006:

There are no other firewalls or anything that should be preventing access, All other port forwards work properly no matter what network I am connecting from. However I receive the following when attempting to access the public ip to the Proxmox Web GUI:



This is a port scan internally:



Scan of public IP:

 

[SyPhEn]

Well, all of the sudden it started showing up on the public IP. Not sure what that was all about because as you can see from my above post, it should have been working fine from the start.