[HELP] Error: Proxy loop detected (500) in Cluster test on Proxmox 3.1

[Tacioandrade]

[SOLVED] Error: Proxy loop detected (500) in Cluster test on Proxmox 3.1

Anyone here in the group had this problem when trying to migrate a container in a cluster without storage: Proxy loop detected (500)

In my test environment I tried to configure a cluster and it worked normally, however in time to test the migration of containet this error occurred and secondary node stopped responding and never came back, even with the reset of both the master and the slave.

I wonder if this error is normal or I did set up something wrong?

Following the data to help detect what may be the problem:

NODE MASTER

root@proxmox1:~# pvecm status
Version: 6.2.0
Config Version: 2
Cluster Name: tacioandrade
Cluster Id: 48385
Cluster Member: Yes
Cluster Generation: 8
Membership state: Cluster-Member
Nodes: 2
Expected votes: 2
Total votes: 2
Node votes: 1
Quorum: 2
Active subsystems: 5
Flags:
Ports Bound: 0
Node name: proxmox1
Node ID: 1
Multicast addresses: 239.192.189.190
Node addresses: 192.168.0.15


root@proxmox1:~# pvecm nodes
Node Sts Inc Joined Name
1 M 4 2013-09-23 23:40:58 proxmox1
2 M 8 2013-09-23 23:43:52 proxmox2



root@proxmox1:~# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.0.15 proxmox1.tacioandrade.com proxmox1 pvelocalhost
192.168.0.16 proxmox2.tacioandrade.com proxmox2


# The following lines are desirable for IPv6 capable hosts


::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts


NODE SLAVE

root@proxmox2:~# pvecm status
Version: 6.2.0
Config Version: 2
Cluster Name: tacioandrade
Cluster Id: 48385
Cluster Member: Yes
Cluster Generation: 8
Membership state: Cluster-Member
Nodes: 2
Expected votes: 2
Total votes: 2
Node votes: 1
Quorum: 2
Active subsystems: 5
Flags:
Ports Bound: 0
Node name: proxmox2
Node ID: 2
Multicast addresses: 239.192.189.190
Node addresses: 192.168.0.16

root@proxmox2:~# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.0.15 proxmox1.tacioancrade.com proxmox1
192.168.0.16 proxmox2.tacioandrade.com proxmox2 pvelocalhost


# The following lines are desirable for IPv6 capable hosts


::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts





Thanks in advance for any help. =)

 

[Tacioandrade]

After reformat the slave node and put the correct ip (since the first time I had changed the IP for web gui) the problem no longer occurred and now even live migration'm getting run. =D

Sorry I created this topic before you even try that, but it might serve to someone who is having the same problem as me. =D

 

[dietmar]

Please note that there is no 'Master/Slave' relation. All nodes are 'Master' in 3.X