HDD containing proxmox moved to new computer

[bydn]

Hello, I'm still very new to using proxmox and have very little experience. I have two machines, one being a 4 core intel system and the other an amd 2 core system. I had to move the HDD containing proxmox to the intel one. The computer boots up fine into proxmox but I can't connect to it. I know that the new network card has a different mac-address. I was hoping if someone could tell me what to do step by step so I can get it working again. Please and thanks!

 

[Falk R.]

Hi,
check with "ip a" your ethernet adapters and IP Settings.
edit the /etc/network/interfaces and change the value on your vmbr0 the bridge-port to your connected ethernet interface.

Iam not the specialist, but this is my way.

 

[bydn]

Yes, it worked finally! I used "ip a" to check the ethernet adapters then went into (nano /etc/network/interfaces) and changed vmbr0 to vmbr2 and also enp1s0 to enp3s0. Thank you!