Hand holding w/ multiple IPs

[CountryEd]

Hey folks,
I look at the doc and watch some excellent videos but I just can not wrap my head around setting up the required network.
I have a dedicated box with a IP/29 assignment. I can log in to the web GUI with *.*.*.100:8006
But for my VMs I want to assign the others that are left:
.101
.102
.103
.104
And my gateway is *.*.*.99
I just do not know how to set this up. I do see on the initial setup that my NIC is showing the /29 but I can not do a linux bridge as the /29 is taken.
Anything you can do to help is MUCH appreciated. I have used ESXI but want to really try ProxMox instead on my hobby box.
Thank you.

 

[vesalius]

No real reason to hide internal private addresses unless those are public IPs. Seeing your /etc/network/interfaces files would help garner better specific suggestions. can be done differently, dependent on your gateway/router.
https://pve.proxmox.com/wiki/Network_Configuration#_choosing_a_network_configuration


Post in thread 'Assigning a public IP to a LXC container'
https://forum.proxmox.com/threads/assigning-a-public-ip-to-a-lxc-container.104608/post-450835

 

[CountryEd]

I probably did not explain will. The data center has assigned five public ips to my single nic. I want to use the first up for ProxMox admin be able to assign as needed the other four pubic ips to the vms.
Can that be done at all?