Hi all,
Hoping anyone can assist me with figuring this out. As soon as start the Plex VM with my GPU passed to it my PVE host crashes. The only way tor recover is to hold down the power button and turn the machine back on again. Here are the guides I followed:
Proxmox crashes when GPU passthrough, Windows 10 VM tries to start up
Plex on ProxMox Tutorial WITH nVidia Hardware Encoding
Proxmox GPU passthrough | Configuration setup
Artifacts from my machine:
Hoping anyone can assist me with figuring this out. As soon as start the Plex VM with my GPU passed to it my PVE host crashes. The only way tor recover is to hold down the power button and turn the machine back on again. Here are the guides I followed:
Proxmox crashes when GPU passthrough, Windows 10 VM tries to start up
Plex on ProxMox Tutorial WITH nVidia Hardware Encoding
Proxmox GPU passthrough | Configuration setup
Artifacts from my machine:
Code:
root@pve:~# pveversion
pve-manager/7.3-3/c3928077 (running kernel: 5.15.74-1-pve)
Code:
root@pve:~# nvidia-detect
Detected NVIDIA GPUs:
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK106GL [Quadro K4000] [10de:11fa] (rev a1)
Checking card: NVIDIA Corporation GK106GL [Quadro K4000] (rev a1)
Your card is supported by all driver versions.
Your card is also supported by the Tesla 470 drivers series.
Your card is also supported by the Tesla 450 drivers series.
Your card is also supported by the Tesla 418 drivers series.
It is recommended to install the
nvidia-driver
package.