Got the connect problem after install the Ceph via Portal

P

parker0909

Well-Known Member
Aug 5, 2019
96
0
46
37
Hi All,

My name is Parker , i am facing the problem related to ceph.I have tried to install the ceph via Proxmox VE portal, i got the disconnect message during the installation status andi unable to do the configuration. After i refresh the page, it seem the node ceph cant connected to the existing ceph. May i know any idea we can to fix the ceph problem?

I have attached the print screen to show the node 2 - Ceph init node and node 3 should be the node have ceph problem.

Thank you.
 

Attachments

  • Node2_Ceph.png
    Node2_Ceph.png
    28.8 KB · Views: 7
  • Node2_configuration.png
    Node2_configuration.png
    45.5 KB · Views: 8
  • Node3_Ceph.png
    Node3_Ceph.png
    27.8 KB · Views: 5
  • Node3_Configuration.png
    Node3_Configuration.png
    34.2 KB · Views: 5
I have attached the print screen i got the "got timeout" message during the ceph installation process.

Parker
 

Attachments

  • got timeout.png
    got timeout.png
    27.6 KB · Views: 7
Hi All,

The good news all node ceph should be normal now, but we facing another question when i try to create the OSD with DB disk. I got below message.


'/dev/sde' is smaller than requested size '800156322201' bytes


May i know how to calculate the smaller than requested size for DB disk? Thank you.

Parker
 
The DB partition size is 10% of the data disk, when a separate DB/WAL is selected.
 
Alwin said:
The DB partition size is 10% of the data disk, when a separate DB/WAL is selected.
Click to expand...
Thank you. May i know it is able to share with different OSD .For example we have three OSD (8TB SATA),so we can share one 800GB SSD for DB disk. May i know it is good idea for DB disk setting?

Parker
 
parker0909 said:
Thank you. May i know it is able to share with different OSD .For example we have three OSD (8TB SATA),so we can share one 800GB SSD for DB disk. May i know it is good idea for DB disk setting?
Click to expand...
Yes.
 
Alwin said:
Yes.
Click to expand...
I got the problem it seem OSD cant share the same SSD DB disk with not enough free space. it meaning should be i need arrange 3 800GB ssd disk for db disk if we have three 8TB OSD. May i know it is correct? Thank you.

3 OSD
3 x 8TB SATA disk
3 x 800GB SSD for DB cache

Error when i try to create another 8TB OSD
vg 'ceph-527c49e7-0546-403c-8606-8b88cff8c0e5' has not enough free space

Parker
 
parker0909 said:
I got the problem it seem OSD cant share the same SSD DB disk with not enough free space. it meaning should be i need arrange 3 800GB ssd disk for db disk if we have three 8TB OSD. May i know it is correct? Thank you.
Click to expand...
As said, the DB/WAL partition/LV will be 10% of the data disks size. So 4 TB data disk, will result in ~400GB DB/WAL partition/LV. If the partitions geht to big, then you will need to set it in the ceph.conf.
https://forum.proxmox.com/threads/where-can-i-tune-journal-size-of-ceph-bluestore.44000/#post-212147
 
You must log in or register to reply here.
Top Bottom