Hallo für ein projekt was ich gerne machen würde müste ich eine Mips KVM haben
Both images are 25GiB images in QCOW2 format on which a Debian Squeeze or
Wheezy "Standard system" installation has been performed. The other
installation options are the following:
- Keyboard: US
- Locale: en_US
- Mirror: ftp.debian.org
- Hostname: debian-mips
- Root password: root
- User account: user
- User password: user
To use this image, you need to install QEMU 1.1.0 (or later). Start QEMU
with the following arguments for a 32-bit machine:
- qemu-system-mips -M malta -kernel vmlinux-2.6.32-5-4kc-malta -hda debian_squeeze_mips_standard.qcow2 -append "root=/dev/sda1 console=tty0"
- qemu-system-mips -M malta -kernel vmlinux-3.2.0-4-4kc-malta -hda debian_wheezy_mips_standard.qcow2 -append "root=/dev/sda1 console=tty0"
Start QEMU with the following arguments for a 64-bit machine:
- qemu-system-mips64 -M malta -kernel vmlinux-2.6.32-5-5kc-malta -hda debian_squeeze_mips_standard.qcow2 -append "root=/dev/sda1 console=tty0"
- qemu-system-mips64 -M malta -kernel vmlinux-3.2.0-4-5kc-malta -hda debian_wheezy_mips_standard.qcow2 -append "root=/dev/sda1 console=tty0"
By default QEMU emulates a machine with 128MiB of RAM. You can use the -m option
to increase or decrease the size of the RAM. It is however limited to 256MiB
with a 32-bit kernel. With a 64-bit kernel and QEMU >= 1.7, it is possible to
use up to 2047MiB of RAM, passing the memory map to the kernel, adding a mem=
argument to the append parameters as follow: "mem=256m@0x0 mem=XXXm@0x90000000"
where XXX represents the total memory size minus 256MiB. If you don't want to
start QEMU in graphic mode, you can use the -nographic option. The image is
configured to display a login prompt on the first serial port (ttys0). If you
want to switch the boot messages to the serial port, you need to replace
"console=tty0" by "console=ttyS0".
Doch wo trage ich den Kernel ein den in der oberfläche gibt es keine möglichkeit ich hann ihn auch nicht uploaden
Both images are 25GiB images in QCOW2 format on which a Debian Squeeze or
Wheezy "Standard system" installation has been performed. The other
installation options are the following:
- Keyboard: US
- Locale: en_US
- Mirror: ftp.debian.org
- Hostname: debian-mips
- Root password: root
- User account: user
- User password: user
To use this image, you need to install QEMU 1.1.0 (or later). Start QEMU
with the following arguments for a 32-bit machine:
- qemu-system-mips -M malta -kernel vmlinux-2.6.32-5-4kc-malta -hda debian_squeeze_mips_standard.qcow2 -append "root=/dev/sda1 console=tty0"
- qemu-system-mips -M malta -kernel vmlinux-3.2.0-4-4kc-malta -hda debian_wheezy_mips_standard.qcow2 -append "root=/dev/sda1 console=tty0"
Start QEMU with the following arguments for a 64-bit machine:
- qemu-system-mips64 -M malta -kernel vmlinux-2.6.32-5-5kc-malta -hda debian_squeeze_mips_standard.qcow2 -append "root=/dev/sda1 console=tty0"
- qemu-system-mips64 -M malta -kernel vmlinux-3.2.0-4-5kc-malta -hda debian_wheezy_mips_standard.qcow2 -append "root=/dev/sda1 console=tty0"
By default QEMU emulates a machine with 128MiB of RAM. You can use the -m option
to increase or decrease the size of the RAM. It is however limited to 256MiB
with a 32-bit kernel. With a 64-bit kernel and QEMU >= 1.7, it is possible to
use up to 2047MiB of RAM, passing the memory map to the kernel, adding a mem=
argument to the append parameters as follow: "mem=256m@0x0 mem=XXXm@0x90000000"
where XXX represents the total memory size minus 256MiB. If you don't want to
start QEMU in graphic mode, you can use the -nographic option. The image is
configured to display a login prompt on the first serial port (ttys0). If you
want to switch the boot messages to the serial port, you need to replace
"console=tty0" by "console=ttyS0".
Doch wo trage ich den Kernel ein den in der oberfläche gibt es keine möglichkeit ich hann ihn auch nicht uploaden
